Search results

Where did you mount the oil cooler? I see the hoses going down but not sure where you could mount it.

I’ve searched and not really found the answer. Obviously you have to get the knuckle apart to be able to slide the boot on. The inner boot is easy because you can take apart the knuckle by removing the C clip. But how does the outer knuckle come apart? My boot has a hole and I’m losing...

I ordered these clamps but can’t get them on. Too tight. I’m ordering the next size range up, 106-114. Were you able to get the 108’s on?

Buying a Chassis Ear, 6 leads, to isolate where the noise is coming from while driving.

At UBB I heard the typical CV joint click. That developed, slowly, into a thump. At 0-9 mph you don’t hear it, then it thumps once per revolution of the wheel until about 45 mph where it is not heard. Sounded like a broken half shaft to me so I replaced the driver side and found the inner cv...

I’ve only had mine about 4 months but really like it. I installed it myself and it would have been easier if I had a friend help. You have to, as they tell you, position it so it’s high on the latch side so that when you put tire on it settles aligned. Installation was not terrible but a...

Excellent points, thank you.

I have not done this upgrade but heard many have. I bought a Badlands and eventually went to an aftermarket suspension (Icon Stage 8) so I have the whole Sas suspension available in San Diego Ca. But what I wanted to tell you is that I was about to put in the perch collar spacers because they...

Turn Offroad has a great tailgate replacement really. The factory tailgate bolts to the Turn Offroad switch gate. It's built strong. It also moves your tire mount up for 37" tires but you still need to extend the 3rd tail light. I'd also look at bumper mount because then you don't have...

It is a tough decision. Everyone you talk to only knows the tire they bought. To really compare you’d need to have put multiple tires on your rig and tested them. If you just are going for looks, buy what looks good. If you’re going for performance then maybe see what tires perform well...

Are you running spacers for clearance? I’m about to go to 37’s as well and have a 2-3” lift. Also, is your spare a 37, looks like a 35, not judging, just curious.

Thanks. Good comparison photo

Don’t want to spark a portal comparison debate here, but am interested in your thoughts about how much lift you got. What does 74Weld give you? 3-4”, I can’t remember. The 38’s give you 1.5-2”. But what I’m asking is you feel this is plenty or good enough as opposed to the 5+” the other guy...

Are you talking about the heim joint? If so, loosen jam nut, use a large Cresent wrench on the outer part of the joint and twist it straight. IT does need to be straight up and down.

Give it some time. Here are some.

What is the difference from a K02?

I replied to this but I don't see it. No, I still have them.