Search results

They are buried in the packaging. I found mine in the cardboard reinforced area of the box. They are wrapped in plastic

I’ll be there the day before March 5. Sundays are 8 hrs instead of 10 but tgat is when I was available .

I took my parts out and sprayed the blue parts with hyperdip. It looks good.

Do you remember what hole size you cut that to? I want to do mine before I remove everything so it’s ready.

We you’ll get better performance in the highs and the lows maybe a little but you won’t get the advantage of the bigger speakers until you fix it in forscan. The amp is putting a high pass filter on those speakers just like a bass blocker. Honestly they should have done this to the top dash...

honestly seems unnecessary, looking at the JCR winch plate, it only interfaces via the 3 bolts each side, and this setup is already doing that, so those extra gussets and the pin must be for crash... correct me if I'm wrong, or if you have another opinion.

missing parts and hardware include C CAC Bracket (Left Hand) N2DB-19E518-CA D CAC Bracket (Right Hand) N2DB-19E518-FA E Inner Frame Bolt N2DB-19H381-AA F Inner Frame Bracket (Right Hand) N2DB-19E518-DA G Outer Frame Bracket (Left Hand) N2DB-19E518-AA

Hey guys, I bought a Everglades takeoff from a forum member, it came with all the hardware that attaches to the frame, but apparently there are parts that are installed to the vehicle that the main brackets interface with. It looks like a slot over a pin, to prevent side to side motion maybe...

A good driver can handle the stock tires if you don’t take it too far. First and foremost should be skid plates. The plastic tank is at the low point, it is malpractice that Ford didn’t deliver all broncos with this skid. I got the OEM Ford accessories kit, delivered to the dealer. It was...

Yes they are pretty easy to install.. one bracket the threads were fouled with powder coat for me… but otherwise they fit perfectly and with the steps there is zero spray on the side.

IAG

Same happening to me. It will come apart if you pull on it with pliers. A small bit fell inside my tailgate but doesn’t make noise. For some stupid reason I wanted to use Ford accessories and went with this. I regret it.

Hey Jared, thanks for letting me sit in your beast! I had a great time with you and Krista, and it was an awesome opportunity to be with Todd, the off-roadeo instructor. Ol Florida is a great park!

Hey @magicrobots I'm in Savannah too. The closest I’ve been able to find is River Rock off road park in Milledgeville which is a great park. Try Donnelly WMA in SC north of Beaufort for an easy ride. I haven’t been so let me know if you try it out.

OBX for the roast interior and SAS. I would have preferred the Wikdtrak but I was overruled in favor of the OBX roast

The front fog light harness I know is already installed from factory, but the rear fog light harness is not installed from factory and you have to order it, correct?

Is it easy or difficult to pull the carpet and put it back? Has anybody tried it? Any snags or tricks?

Did the camera relocation kit not work at all? or it didn’t work with a different camera

The wire looks like a coax type wire, is it more than just a pin and back shell? It looks like you can get an adapter to go from it to RCA/Compisite, which is coax. I may just buy a cheap one and hook it up and see. They are $6 on Amazon and $5 for the adapter

This is going to create a Badlands constraint. Just wait for it.