Sponsored

Search results

  1. Less that 5,000 miles and my hardtop is already failing

    I’ve always seen them near window corners

  2. Less that 5,000 miles and my hardtop is already failing

    I assume these are the cracks I keep hearing about? Less than 5,000 miles and stored on a padded cart all summer. I’ve only had the car since August.

  3. Mudflaps (yes I've searched and can't find a good answer)

    Just put the IAG no drill. Do you guys take these things off of you go off road ?

  4. Stripped plastic fender liner clips

    Pryed it out and luckily only had to reuse one per side

  5. Stripped plastic fender liner clips

    Was trying to put the IAG mud flaps on and two of my fender liner clips are stripped and I can’t get them out. Any suggestions for getting these out? Can they just be pried out if they’re entirely plastic ? Can I just cut the heads off ?

  6. Anyone have any mud flaps they like that are compatible with the factory hoop steps ?

    From what I can see, you cannot use the OEM mud flaps with the factory hoop steps installed. There really aren’t many that I’ve seen that clearly say you can use both. Anybody know of any ?

  7. Could this be an issue from the factory? Worth getting PDR?

    Can you tell I’m a bit of an automotive hypochondriac?

  8. Anyone have experience with M&R Light Bars ?

    I’ve never wired anything in a car before. How does this look? Should I wrap in electrical tape to prevent water intrusion ?

  9. Could this be an issue from the factory? Worth getting PDR?

    Ripple in the body it seems. You can see the distortion on the ladder hinge area as it moves.

  10. Could this be an issue from the factory? Worth getting PDR?

    I noticed a small mark on my door. The car has 1000 miles and hasn’t really been in parking lots so I’m wondering if it came like this. Is this worth getting PDR?

  11. Anyone have experience with M&R Light Bars ?

    Did you guys need to remove the skid plate on a badlands / capable bumper or was there enough room to squeeze through?

  12. Anyone have experience with M&R Light Bars ?

    I was planning on using the bolt under the hood like in the install video. Same gauge?

  13. Anyone have experience with M&R Light Bars ?

    So I’m looking to get the materials together. I have the crimper and the heat shrink splicers. What size ring terminal do I need to ground it on the bolt?

  14. Anyone have experience with M&R Light Bars ?

    How hard was hiding the wire ?

  15. Anyone have experience with M&R Light Bars ?

    How’d you hide it?

  16. Anyone have experience with M&R Light Bars ?

    Is the process truly as easy as I listed above ?

  17. Anyone have experience with M&R Light Bars ?

    Is it as easy as it looks? Mount bar Connect positive to brown/green for Aux 2 with a crimper Ground negative to body with a bolt Done

  18. Anyone have experience with M&R Light Bars ?

    I’m looking for a light bar for my capable bumper and this seem to be a good fit. It’s affordable, subtle, and doesn’t require drilling. Does anyone have any experience with it? https://mandronline.com/products/copy-of-2022-ford-bronco-capable-bumper-40in-light-bar?variant=42467157344416

  19. Extra lighting that doesn’t cause a ton of wind noise ?

    This one is tempting! Like how clean the install is.

  20. 2024 or 2025 Bronco ??? What should I do?

    I just bought a leftover 23 for like 15k off


Top