Search results

@daryl6784 Do a search for: 3M Black Super Weatherstrip Adhesive, 03602 Follow directions. 1 Oz. should do you.

Mine came down the line early May 2024

I guess I have been lucky with my '24 Wildtrak 4 door hardtop. No leaks , yet! I would take the front panels off (as per the owners manual) and make sure the seals are not folded or out of place. Put the panels back in the correct order as well. I would hold off on the seal lube until your...

I corrected my post. Thanks!

The 3 outer bolts are only threaded into thin plastic. There is no insert behind the plastic. Use a screwdriver to pry while you turn them out. The 2 inner bolts do have a captive nut that could be spinning. Like @RBJRBJ says, it may be helpful to use a < correction 6 point > socket to be...

I believe FAT32 is the most compatible.

Thanks!

@Ducati1098 DO you have access to the specs of that bolt? They are on national back-order with no ETA. I need to find a generic replacement. Thanks for all you do for us on this forum!

I bet if your IP address originates from AZ it won't give you any chance to order it.

Looks like they doubled the install price since last year! Still a bargain (if not in AZ).

Unfortunately, The state of AZ has some sort of restriction on Ford selling parts directly to customers via mail order. Maybe someone else will chime in with details?

Thanks, I will give it a try.

I think it is HB3. I attached the pic from the install sheet. It shows a little more detail than my pics did. The bolt I need is at the top. They say the bolt at the bottom wasn't used in my model.

A while back I put on a set of Weathertech rear mudflaps on my 2024 Wildtrak. I noticed today that the factory bolt that you have to remove and re-use on the passenger side is missing. I am hopeful that @Ducati1098 can get me the correct part #. I have attached a photo. All remaining bolts...

I LOVE welding cable. Very tough, high temp insulation, very flexible, very fine copper strands in the wire. You can get it in about any gauge, #10 or bigger. I use it on all of my high current DC projects.

I have worn out hundreds of Deep Cycle batteries in communications sites over the decades. I must agree with Dipsy30, Deka batteries always outperformed the others. Deka is actually made by East Penn Manufacturing near Kutztown PA. So any battery made by East Penn (lots of different brands)...

Did this update turn on the double horn honk when opening the door with it running for anyone else? I had mine disabled with Forscan, but it is back after this update.

There are also NMO caps that will cover and seal the NMO mount contacts completely from water and dirt. I prefer the Larsen type shown here: https://www.radioparts.com/pulse-larsen-nmocapb-black-plastic-rain-cap

Maybe the last one before the Strike!

Some very old OBDII adapters have to be manually switched to see all of the modules. The newest ones switch automatically. Could that be it?