Search results

Easy buy if it looks as good in person as the renders make it look.

Nice! What wheel/tire combo and what lift did you get?

Sounds good! I've got an appt. with Larry H Miller since they said they had the parts readily available.

Good info, thank you. So you've been out your car for 3 weeks? Did they give you a rental?

Has anyone taken their Bronco to San Tan Ford for any recall or warranty work? I have an appointment next week for the Driveshaft replacement recall and also a leaking A-pillar. Kinda worried I'm going to be out of a car for a long time while they figure these issues out.

I got the Apex Badland 12000 and the JCR Winch mount for mine. Was about $1000 total installed myself and didn't really need anything else.

Doesn't CAN use 2 wires? Do your lights tap into the LIN bus that controls the light dimming?

Looks good! What wire needs to connect and to where under the dash?

I got angry that the cargo area was so dim so I kinda got obsessed with making a solution over the weekend. I wired up an LED strip to a reed switch on the cargo gate along with a relay to light up when the door opens. Works pretty well and is pretty well hidden!

Looks great! Thinking about getting these. Do you have the details on cost? Like actual parts, install, alignment, etc? Thanks!

@gringoloco I believe based on this information that for C2280E (this is a hypothesis, it has not been tested yet) 1924955-4 = 18 AWG terminals 1924955-3 = 22 AWG terminals This was based on some F-150 forums i found and the above information and has...

Awesome! Are you able to hit that "Check for Terminal Part Numbers" button and tell me what they are for pins 26 (18 AWG) and 31 (22 AWG)?

It is on C2280E which looks like the topleft-most connector. The top left Blue one in the picture I just took. I am not sure what connector P/N this is. A longshot, but maybe @flip can help us figure out what connector P/N mates with C2280E on the BCM and from there we can figure out the pins...

Yes, the picture I posted on pg. of this thread has the pin numbers in it for the taillight and the BCM side. if you download the electrical schematics zip that someone posted on Bronco6G, you can find both driver and passenger sides.

I'd probably panic for about 8 hours then lay down to go to sleep that night and realize all you've gotta do it let a lot of air out of the tires.

I'll try and prototype it sometime in the new year and report back.

I think if you were to run wires from pins 5 and 6 to the correct pins on the BCM ( C2280E ), and then activate the proper settings in Forscan, you could get this to work with Halogen without delay.. Would love to try this but have spent too much $$ for Bronco Presents already and might be able...

take my money!

Im in for 1!

Did you find out how it blew or was it just a bad fuse?