Search results

Not exactly sure what you mean but, the Raptor suspension is entirely different and taller. Raptor fender flares are MUCH MUCH bigger. Drivetrain and axles are different. Wheels are different (F150 bolt pattern). Most any bronco with a "good" suspension lift and crash bar removal can run 37s...

Does this count if it's a RAPTOR spare ? :) seriously though, I week after i got my raptor (used) my landscaper hit the driver's front tire with his trailer. Punctured the tire. He was cool, got me a new one that day. We put the spare on the driver's front, the next day they had a new one...

Replaced all 5 of the 4-inch speakers with Infinity 4032's. No Bass blockers we used, just the signal that was coming into the Ford 4 inch speakers. This made a decent improvement in sound quality (more presence / life like / better highs). Replaced the 6.5" kick panel speakers with JBL601CF...

If you have a B&O system, metra / red wolf has a harness that will plug in to the subwoofer plugs. They are the same as the dash speaker harnesses.The other ends are spades. Clip the spade off and you should be good to go.

Having used their product in a Jeep W/O a headliner, I will definitely vouch for the quality of their product. This is GREAT INFO and provides some "food for thought" with the upcoming Black Friday sales. Makes me lean towards it. FWIW Hotheads usually has a Black Friday sales they post on...

Thank you - very helpful.

I am referring to the OEM (ford) headliner that comes with many of the Hardtops. HotHeads has a product that adheres to the "plastic / polycarbonate" top using 3M tape OR a product that adheres to the "OEM headliner" using Velcro. "It’s hard to tell in the pics - what is HHH material made of...

Anyone install the Hotheads Headliner over the OEM Headliner on a hardtop? If so did you notice much of an improvement in noise reduction? Thanks

OK, How 'bout the HotHeads Headliner OVER the Factory headliner? Has anyone tried that? In my Wrangler w/o a headliner it made a decent difference; I'd be curious how good it would be in my 24 Raptor (hardtop and headliner).

Hook it up to the B&O amp or an aftermarket amp bridged?

You WILL have to forscan the chimes. It the only way to fix it. When I get home I'll look for. The forscan settings. Also. Depending on how your amp is integrated you may lose surround.

So that brings up a "basic" math question: Given the B&O amp produces 110 w/ per channel (under the best of conditions and only on holidays that have a full moon 🌝): A dvc sub will receive a single 110 watt input to each voice coil, However bridging the inputs always produced more output...

From Crutchfield: About the Infinity Reference REF-4032cfx Product highlights: 4" 2-way speakers (pair) Plus One+ polypropylene woofer cone with hi-roll rubber surround 1/2" balanced textile dome tweeter True Four Ohm Impedance technology speaker's 3-ohm impedance combines with speaker wire...

So based on this, it seems like we could use a DVC 4ohm or a SVC 4ohm (combine inputs) sub.

If those 4032s come COVERED in styrofoam balls, all over everything including the tweeter, don't fret. I used a blow gun on low pressure to blow the speakers clean. Mine were 44.00$ a pair and I figured if I trashed one it was no big deal. I just blew them clean of the Styrofoam, and trimmed...

Infinity 4" speakers will fit in the front corners, center channel & rear pods. You WILL have to trim a set of tabs off. Can be purchased open box on amazon @ 54.00$ a pair. Amazon.com: Infinity REF-4032CFX Reference 4 Inch Two-Way Car Audio Speakers : Electronics

How is that working out and what sub did you use? The idea of bridging subwoofer channels into one and connecting to the new subwoofer scares the poop out of me. I'm picturing surfing ebay for a new B&O amp :crying: . thanks

I'd concur. That said, with efficient speakers (infinity 4032 & JBL601CF) the system sounds pretty decent. Clean and enough volume for most listening (probably not 75 on the highway windows down, probably not top off)

Thanks, The following comes from the belief that EVERYTHING YOU READ ON THE INTERNET IS TRUE :crackup: I've read the B&O amp is 660 watts 4x110 (dash corners & kicks) and 2x110 (sub). I'd be skeptical of that claim, but it is what it is. MBQuart makes a drop in sub replacement, some of the...

OK, I believe I answered my own question. According to the picture below, these are the feeds going into the B&O subwoofer. This to me implies that we want a DVC sub. I supposed the ends of the Metra Harness could be used for inputs to a LOC or and AMP w/ high level inputs, or just...