Search results

Its a bracket I made to carry fishing poles. I made the bar attached to the side of the trail sight out of aluminum flat bar , painted it with a etching primer , and then a matt black finish , then I used a mount railblaza makes for kayaks for side mounting , and just mounted all that with...

As my bronco has several things themed around helping me haul gear down to the OBX for fishing for Redfish and using it for Redfish Fishing =) I give you some custom decals

Thanks , yeah , a lot of custom wiring etc , but its so bright lol. I really just enjoyed figuring out every aspect of it. Was a lot of fun.

So this interior was professionally done by me , inside you barely see any wiring , I utilized the JCR T Molle cage I installed for this. There is an extensive post I did on this on all the parts I used. I'll post a link to that post. Essentially all the items for this in an amazon cart might...

Well , solved it , The brown wire which is the power wire HAS , and I repeat HAS to be connected to the power wire control mod feeding the Left head light or right headlight in conjunction with the green and yellow being connected to another power wire that is for the turn signals but not the...

I recently installed one on my 2022 Bronco. Ran the hot to the same hot for the Oracle letter lighting. Grounded to the battery. I hooked the left and right turn signal wires to the wires behind the plug that attaches to the headlight housing just like a lot of others have done. Now on to the...

Not sure that will work if they are on the same circuit , because you have to have it on to use it and simply having it on will keep it reset to the first mode? I have no idea , cause I never used the harness they supplied or the relay etc , I made my own harnesses. Hope it works though.

ok so there is one wire , If I remember right , its white. Its a trigger wire , only needs a quick tap to voltage source to trigger it to change modes. If you keep it on that source for more than a second or two , it will reset back to the first mode , which is spot white only. I have my under...

There is a reply to a post somewhere I did that has all the links for the eaton bussman fuse box, which is for the positive side only and that is also the fuse side and the waterproof side. See , waterproofing only has to be done to the positive side of a 12 volt circuit , if water gets only on...

Not a good reason. No sir. Its more for hiding the wires to the rear of the lights , the bracket I have covers most of the plate. I do think there is more metal behind the plate (sharp edges) and not as much room but probably still enough for the wire. Worst case scenario if I ever get rid of...

We go through so man pipes man , I laugh at the same people who keep coming in. Week after week. Buying more pipes. The reason 99.9 percent of the time , they dropped it and it broke. I tell them , there is a sure fire way to not break the pipes. They are like how? I'm like , Do not get so...

Thank You

Always here , its our family business , I do not smoke , but I can make money off what is used to do it =P Oh and its just a very small part of our business. We do so many other things. Look up Southland Trade Corporation................ Our Website

good tips , yeah , deflector tip does work better for sure.

Down this thread is links to what I used. Termination items.

I may have to test the theory on that. I would be interested to see the difference in conductivity and strength of the wire. I got a way to test all this to a degree. Interesting.

I just use a heat gun with low and hi from Milwaukee tools. Works great so far.

I'll try to be short on this , the connectors for all my positives are one type of connector with TWO parts , a FEMALE and a MALE side. The grounds are all terminated at the end with lug terminals. Its literally impossible to get it wrong. So the kit I got from amazon is this. Positive...

SOme conversation on it on Bronco nation if you did not watch the video , speaking specifically the process in text. People twisting wires is probably the worst thing to do. Butt Solder demonstration process - Bronco Nation (thebronconation.com)

A small demonstration of how I solder butt connectors.