About 4” of space to reach through. Very tight. I just installed the plate and haven’t tried to change the oil yet with it on. I can reach in and unscrew the Ronin cap though.
Original plastic “splash guard.”
What that splash guard was ”protecting”
Coverage comparison part 1
Coverage comparison part 2
Combined comparison, flipped over
Ronin oil drain plug access is very tight. About 4” of clearance. I was able to reach in there and turn the Ronin cap, but...
After a hard rain today I decided to go for a drive. Opened the driver door and noticed a little water on the floor. At first I thought it may have just dripped in when I opened the door. But, I then noticed a bead a water in the pillar vent and water beads around the headlight switch. During...
I ordered the transfer case skid plate and hardware from https://www.ruxerparts.com/ (kudos to @flip for helping me to resolve a missing bolts from the order issue). The part numbers for the plate, 2 nuts, and 4 bolts are below. Shipping was $15. There are better plates out there but for the...
Bought these through Amazon. I wanted a set that covered the side of the letters too. These are hard plastic and not just stickers. I chose red as it’s a contrast color that I’m going with where I can (J-Tops, steering wheel cover, …). Easy install. Sticky surface along entire facing. Half the...
Some version of the 2.3 liter will be with the Bronco for a while. It’s shared with the Ranger. Ranger XL trim can only be ordered with the 2.3 liter. Same story as the Bronco Big Bend trim.
I do my own.
The time difference between dealership and doing it myself is non existent and often in my favor. I can change the oil and filter in less than an hour. I recycle the oil at my convenience on my next trip to or passing by the auto parts store.
The price difference for full synthetic...
Thank you for the write up and photos. I ordered my Draw-Tite 76605 through a Walmart link.
https://www.walmart.com/ip/Draw-Tite-76605/2809034149?wmlspartner=wlpa&selectedSellerId=101409059
This Walmart option did NOT come with hardware so you’ll need to buy your own. Picked up some 4” long...
Finally! I was so nervous about only having a rear tow hook on the left side. Now, if I get stuck at the mall I won’t have to worry about which parking spot next to me is empty. Tow hook $70 shipped. Peace of mind while shopping for more bucket hats…priceless.
255/70/16, 5 base steel wheels and tires, 4300 miles on four of them, 0 miles on spare. 4 with 4300 miles had TPMS removed. Also includes 4 base center caps and factory front cloth floor mats. Local pickup only. Riverview, FL.
I’m probably going to go this route on the final version. The one I built already was more of a template from scrap plywood. I glued one of my wife’s old yoga mats to the top for “grip” on anything I place there. Glued old yoga mat on the bottom to not scratch the Bronco interior plastic that...
After sleeping on it, this is the plan now. My wife pointed out that my curiosity is costing me more time and possibly money than just getting it done.
I did not physically see the sensor. So, I’m not 100% positive there is one in there. But, I also had a different experience with the sleep/wake that you are describing. I had my base steelies stacked in the garage overnight. I was getting concerned that the OBX spare wasn’t sending a signal. I...
Purchased a set of 5 OBX (2022 MY) non sas wheels and tires to replace my base steelies (2023 MY). Seller said TPMS were removed. Using Android phone Detectify app, I got a hit that the OBX spare contained a TPMS sensor…or at least something in that rim was emitting a signal. Put that one on as...
Sending PM. I can pick them up this Saturday, 6/3 between 8am and 9am. Not sure if that qualifies as “first.” Definitely appreciate the pay it forward generosity.