Changed the front differential fluid today and the transfer case fluid. 26000 miles. Went with Mercon LV in the transfer case and Valvoline 75W140 in the front differential. Still deciding on a possible aftermarket rear differential cover but that should be soon. Plus Iām still nervous about...
Washers came in today and I completed the fluid change in the transfer case. Thanks again Ducati1098 for the assistance. Some tips for others with the part time transfer case.
1) If you can change your own oil, then you can change the transfer case fluid.
2) Use a torque wrench. It feels like...
Those washers are not cheap. Currently $15 each retail, but able to get them $11 each from local dealer. Special order though. Still, do it yourself and do it right. Peace of mind. With my luck, Iād be the person that reused the washer and it leaked.
2023 Base, 26000 miles, ready to start changing out the driveline fluids.
Decided to start with the transfer case because it's the easiest and I've done this before on my F-150.
I've got the 1.3 quarts of Mercon LV ATF at the ready.
But, all the videos and discussions I've been able to find...
If you are still under warranty, then take it back to the dealership for evaluation. I had something very similar in my 2023 base. It started after about 1 year of ownership. I decided Iād fix it myself even though still under warranty. Many frustrating attempts later I finally got it sealed. I...
https://www.amazon.com/dp/B000NU1B46?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Motorcraft concentrate. Mix ratio based on temp protection needed is on the back.
Back in the dayā¦1979 Ford LTD 351 Windsorā¦Iād pour about a quart of kerosene through the crankcase after draining the oil. Let that flush through any gunk.
We own both. The 2023 Bronco Sport Badlands is my wifeās daily driver. She loves it! Thatās what matters to meā¦and the fact that Iād never buy the 1.5L models of the Bronco Sport.
If you are referring to the Ford transfer case skid, then it should fit according to the Ruxer site. Scroll down for fitment compatibility. https://www.ruxerparts.com/oem-parts/ford-plate-mb3z7e063a
Got the Bronco back today. Noise is gone. Covered under warranty as quoted. They also did an alignment, which makes sense. A few comments though. The good: invoice shows many new nuts, bolts, clips, and plugs were used. I was glad to see this and confirmed it by looking under the vehicle. The...
Yes, back in March 2024. Issue is recent (last couple of weeks). I do plan to take it in but wanted to check with the forum first to see if others have experienced this, get some possible causes so I donāt go in āblindā to the dealer, and ultimately to post resolution to maybe help others in the...
I do not. Using factory rubber mats with the snap in secure points. Noise seems much higher on the column than the floor too. Near where steering wheel is close to instrument cluster.