Search results

Anything frame mounted!

Question on spacer vs perch adjustment to achieve approx 1" lift Rear. Just ordered the 6112 to basically level an existing 2 Door SAS. When I put the roof rack on with weight and add about 40lbs to the spare tire. it required me to put the spacers on like you mentioned to get it back level...

Iwill be there perfect weather all week. Trails should be nice for this time of year. See you at the Windrock store at 8AM!!

I flat tow all the time no problems. Butttttt I have a manual transmission . Have not heard of any problems with the 7mt. I would not trust the Auto for all the above reasons given.

$130 has no dents at time it was taken off. Local pickup in Roswell Ga only. Will install for $30 if need help. see pic for description.

Seen a few of your Windrock pics from previous outings. checked out Onx. Never been to that side of Windrock. Always over on the Rattlrock side. Should be a good time (weather permitting) definitely going to try to make it! Thanks!

The Badlands price did not justify all the options that would have been removed immediately after purchase to replace with their "capable" counterparts. Skid plates/ frame mounted rockers/ 74 weld stage 3 rack etc. At the time my 2023 BaseSas still comes in less after outfitting with Superior...

This is the quick start guide for installing the factory Bronco electric swaybar disconnect. Technically it is a sealed hydraulic unit but this should give you a Basic understanding to start your research. 7min video might not seem like quick answers but for what one of these E-disco cost it...

On my 2 dr I turned in the other direction to keep room for the slide out fridge. I put the pack out crate on top for extra food and random stuff.

Good price, no rattles (yet) survived Moab backcountry!

I did not get any type of foam pads in the box. Might play around with some pieces.

Good product never loosened up over a week of rough backcountry.

Canyonlands NP Forbids you to connect a hammock to any trees or rock structures... So picked up a receiver hitch hammock and made a bracket for my step bar to get it out of the way from the rear hatch and under some shade!!

Nitto Trail Grapplers 35 12:50 mts heavy compared to stock but sidewalls are super strong ran at 16 psi no problem I would run at 12 psi for the next outing.

That sucks to hear. I bought the cheapy Amazon Hooke road for $450 and just went on an overlanding trip and it moves around considerably/ make noise from that exact location. For $450 I can expect it but not at over 1k!!! I think I will get rid of the hooke road and get one that comes down...

Just took a 12 day trip to MOAB from Atlanta (29 hours drove straight through) to go through the three land Districts of MOAB. (FYI we had 3 people in the Bronco) We got great ( I Think the best) backcountry camspights to be had in each district. First District was the Needles and stayed at...

overlanding gear was messing up my "Stance" I just did this to the rear and did not want to drop too much coin.. It added about 3/4 inch of lift to offset for weight squat. Originally ordered 1" composite spacer but decided against due to droop/ tension under articulation would destroy it. I...

That's the solution but it is too much work to compensate for a piece that needs to be billet Aluminum. Broncbuster makes some 1.5" and I only need 2 but they are $250 for the pair. I ordered this cheap front level kit and will just stack two of the per side on the rear. I will need to...

Thanks!! Thats what I neede to hear. Going to send em back and save the hassle! At this point it's cosmetic more than anything just trying to find a quick cheap solution instead of having to do a bunch of fabricating.

Under full droop and twisted up I doubt they'll be any lateral but they'll definitely be tension and pulling downOnce the shock is fully extended inside the strut the force is going to be on those bolt connections on the spacer not to mention the unsprung weight which in itself probably isn't...