Search results

Hey all, I couldn’t find anything about removing the driver side kick panel. Due to the foot rest it just didn’t want to budge and I really didn’t want seriously bust anything. Well I figured out a way to get the kickpanel out while leaving the foot rest in. Just a simple process of busting the...

I want a good look and performance for my value so I am thinking of being conservative with an upgrade to 35” tires and new wheels when my stock ones need to be changed. Will I need to do a lift to accommodate 35s? What performance issues will I face? Will I have to remove the frame extensions...

Anyone out there have the pinout for the connector on the back of the mirror. I think the following- pin 5 (Black) negative Pin 8 (white) Accessory power - 12vdc pin 16 (green)

I am debating pulling my Carbonized Gray fenders off, then sand them down and paint them flat black. Maybe a textured black. Don’t want spend a bunch but I think it will look good. Options and opinions are welcome.

I thought I would chime in on what I came up with for a very inexpensive lift system for my OEM 4dr Rack and the three top panels. There is no reason this couldn’t be use for rear section also. I found a this hand winch “Zostera Trailer Boat Hand Winch with Heavy-Duty Gears 1200lbs” for $36...

Hey all, I thought I would pass on a great product for any two way radio install. This cable comes with a detachable UHF head so you can easily thread the cable assembly through the various cable troughs inside the cabin without cutting tie-wraps. there will be other pieces in different posts...

What was the first thing you did to your bronco? it’s hard to nail down, but the center backseat headrest had to go… after that I would recommend everyone should install protective film on the windshield before you put any miles and chips on the glass. well after that, it only snowballs as you...

Anyone have the Auxiliary Switch plug pinout at the switch box itself?

Great day to celebrate our freedom. For all my brothers and sisters who served this great nation, thank you. Please bow our heads for those who paid the ultimate price.

I am gathering my install/purchase list. I can’t find the post from the guy who remoted the mic connector up to the auxiliary switch console, please help

Need help identifying and finding reviews for skid plates for just the fuel tank…….. my ‘22 OBX 4dr, 2.7L needs this single piece and try not to brake the bank

FYI - after logging in Montana I found the Rough Country Hidden Winch performed like a champ. It pulled logs of a couple thousand pounds with no problem, but for lacking feature - access to the Engage/Disengage lever. Spooling it out via the motor is way too slow and could mean the difference...

Hey FYI for all those DIY’ers, After removing and reinstalling my bumper (Modular Steel) about 10 times now, I finally found a super easy way to help lift the bumper a fraction of an inch so that I can get the bolts started. Simple bar, in this case a breaker bar, through the hole to the frame...

Before I start tearing my installation of the RC Hidden Winch up, I wanted to check to see if anyone else has engineered a method of using the release/engage lever on the winch?

So after a 5,000 mile trip through 9 states my bronco ran like a champ. I used my stallion to help pull literally tons of dead logs out of my property in Montana. At one point I almost buried my stead in some really soft nature, but was able to work my way out of the muck. Now after seeing...

I am finding the rear third break light to be a potential breakage issue. When I am climbing up and down off the roof while packing the roof rack my foot will find that light. One of these days I am going to break it.

22’ OBX 2.7L. Now pushing 7k miles and on a long trip. Over 6 months ago I added the aFE Hot and Cold Charge pipes, the Whipple IC. The boost psi dropped to zero and failure on the shutter control. Is this a waste gate issue? I checked to ensure all the charge pipes are still well seated...

First, I think the labels from stickerfab are great, but Ford missed a simple configuration on the aux switch to make labeling easier and more efficient. Then Stickerfab could be really knocking it out of the park. Well they could still make the label longer to enhance the DIY removal of Ford’s...

Curious if anyone has a simple procedure for removing and installing a window in one of the doors? I want to install shatter film on the glass. 2022 Outer Banks 4dr. Trying to avoid any install alignment issues.

After getting the cheat cable for the AutoStart memory and then getting Ford Performance kit and updating/improving my new toy (2022 Bronco). I wonder if anyone has compiled a full list of things/features that can be changed? not knowing anything about the forscan programming, can I implement...