Search results

Yes, Mag Cloride (Idaho and Colorado). No discloration or spotting.

Thier powder coat last, had a bumper on my Xterra from them. After 16 years it was still good, even with all the bug juice over the years.

Well I was about to go get myself a puzzle but yeah um, that sucks.

You can unlock all goat modes with Forscan. Slippery mode is good for this, it dumbs down the throttle and shift points as well as puts vehicle in 4A if equiped (I am not sure if it it goes to 4hi without the full time transfer case). Pretty sure this chart is accurate but I reserve the...

How was the boulder field coming back down toward Aspen on Pearl Pass? Hope Taylor Pass/Park and Italian Creek are on the agenda. Can't believe the Aspen trees are still green. 3rd week of September is usually the prime time up there.

Your under 1000miles on the engine/trans aren't you? I am convinced that there is break in period that the louvers do not open. I noted insanely high temps on my Bronco until broken in. A bit of speculatin on my part as I have no hard evidence on this but having flashbacks to my first 1000...

Paid $63.65 with 2.7L at Lithia Ford in Boise.

He's got a real Bronco, well his wife does anyway.

If you have a hitch the hitch safe with some dyi faraday material seems to work. Layer of aluminum foil, paper towel, aluminum foil 2x.

I got signature lights off ebay. They have a 10% marking with a headlight beam icon, I don't know what that means but its in my head they are slightly brighter but not significantly. I should probably document this better for the forum, but the caveat being I don't know if what I have is...

So you post a caveat, I mention you can get around the caveat, then you get all crazy about OG looks. I swapped them. It's a personal thing. I got a set for sale if you think they are so great, then you will be super cool and opinionated, making you a double threat to society all for the low...

You can put the LED headlights on a black diamond...silly FMVSS item for a winch.

I believe this is it. https://www.corsaperformance.com/collections/2021-ford-bronco-4-door-2-7l-turbo/products/2-75-in-cat-back-multiple-options-2021-22-ford-bronco-2-7l-turbo-4-door?variant=40066938798166 $860-$1140.

Excellent design idea, love the idea of keeping these inside and not hanging off of something outside.

I got a 4dr and my gap is about 1/2" different between driver and passenger rear door. I got a little less difference by reseating the hard top, helped a bit with the wind noise in my case.

Screaming goat FTW!

That's not ring and pinon size, that's RPM of engine at a set speed. I wouldn't run more than 33's on 3.73s, just personal experience with other rigs.

So a trick to getting the hole locations to line for projects like this is to put the bolts in the holes a few threads. Then line up your wood and smack each location with a rubber mallet. The bolt should leave a good impression on pine plywood, remove wood, then drill the holes from the back...

Still coming soon from hotheads. https://hotheadheadliners.com/pages/ford-bronco-headliners

Lame. Op specifically asked if it would impact offroad capabilities, this thread isn't about how much you offroad.