2025-26 B&O Audio upgrade - Zen Power-9 F25

[dougcjohn]

Our box does take up almost all available space behind the panel. This is the beauty of 3D printing: the shape can be almost anything.

We sent an email to Fraser at @mObridge to see if we can get the dimensions of the Power-9, which do not seem to be listed on the site. He hooked us up last time for the mObridge K2. We designed a box around that.

Since it does fit in the stock location like the B&O, I am going to say it will work with our box. But I want to add it to our CAD and make 100% sure.

Sounds Good... when you get to the stage of including the Power-9... let us / me know. I'd be in the market to increase sub woofer.

Sponsored

 

[GearShade]

Sounds Good... when you get to the stage of including the Power-9... let us / me know. I'd be in the market to increase sub woofer.

Fraser came through and sent us what we needed!

We have a test box printing right now. We will send it to our test subject and make sure it works 100% as designed.

 

[dougcjohn]

Fraser came through and sent us what we needed!

We have a test box printing right now. We will send it to our test subject and make sure it works 100% as designed.

Sounds wonderful, and will the box have a suggested, recommended woofer size and brand (for depth) that you design around?

My navity, will you be producing the enclosure box for Fraser’s Power-9 Bronco Kit as an options add-on, or will that be a direct purchase through your shop?

 

[GearShade]

Sounds wonderful, and will the box have a suggested, recommended woofer size and brand (for depth) that you design around?

My navity, will you be producing the enclosure box for Fraser’s Power-9 Bronco Kit as an options add-on, or will that be a direct purchase through your shop?

Due to manufacturers using slightly different specs for their own sub, we design the box specifically for that sub. We can design it around almost any shallow-depth 10" subwoofer. We are a Kicker retailer, so Kicker CompRT 10" will be a given. We also do a lot of boxes for the JL 10TW3 sub, which this first box is going to be. So that is always on the list too, shown below.

We will produce the box to mount the Power-9 F25 directly to the box, just like the B&O would have been. These boxes will be purchased directly through our shop. We are not a Zen retailer.

https://additivecaraudio.com/

 

[dougcjohn]

Opinion on B&O Speakes... When available I'm moving to the Power 9 F25. What Speakers are suggested as a good B&O Upgrade, retaining the B&O design of 3 Dash speakers, and converting Rear to 6.5"... and retaining a rear subwoofer in OEM location, although increasing size.

 

[scanaday]

Opinion on B&O Speakes... When available I'm moving to the Power 9 F25. What Speakers are suggested as a good B&O Upgrade, retaining the B&O design of 3 Dash speakers, and converting Rear to 6.5"... and retaining a rear subwoofer in OEM location, although increasing size.

I am putting in the Audison Prima Plus & Play bundle from TrailSeven with the Power9 and the JL JTW3 with the Additive car audio enclosure. I'll let you know when it's complete in a couple of weeks.

 

[dougcjohn]

I am putting in the Audison Prima Plus & Play bundle from TrailSeven with the Power9 and the JL JTW3 with the Additive car audio enclosure. I'll let you know when it's complete in a couple of weeks.

Sounds great, looking forward to your assessment.
Does that set provide 3 Ft Dash speakers and 6.5" rear upgrade? What size the JL JTW3 woofer?

 

[scanaday]

Sounds great, looking forward to your assessment.
Does that set provide 3 Ft Dash speakers and 6.5" rear upgrade? What size the JL JTW3 woofer?

Yes 3 dash coaxial, 6.5" mid bass kicks, rear 6.5" coaxial. It's a 10" sub.

 

[23OBX2.7]

MP?

 

[dougcjohn]

Yes 3 dash coaxial, 6.5" mid bass kicks, rear 6.5" coaxial. It's a 10" sub.

Sounds like a great setup… Highend Speakers, that was what I had in mind.

Looking forward to hearing more about it!

 

[dougcjohn]

I am putting in the Audison Prima Plus & Play bundle from TrailSeven with the Power9 and the JL JTW3 with the Additive car audio enclosure. I'll let you know when it's complete in a couple of weeks.

Been reading up and comparing the Audison Prima Plus, to other Speaker sets. Those have great specifications and range. You've selected an excellent set for the Bronco.

Are you putting the speakers in while waiting for the Power-9 and enclosure to complete?

Sound deading, have you considered the SoundSkin precut set for Bronco. They offer a full 4 Dr set: doors and floor, and an optional Rear box kit. The SoundSkin is much higher priced than I assumed. Not sure how much it would help the Bronco.

 

[scanaday]

Been reading up and comparing the Audison Prima Plus, to other Speaker sets. Those have great specifications and range. You've selected an excellent set for the Bronco.

Are you putting the speakers in while waiting for the Power-9 and enclosure to complete?

Sound deading, have you considered the SoundSkin precut set for Bronco. They offer a full 4 Dr set: doors and floor, and an optional Rear box kit. The SoundSkin is much higher priced than I assumed. Not sure how much it would help the Bronco.

I already put in the full sound skins package. It made a big difference in noise. I’m going to have the installer put in both the audison and the JTW3 at the same time.

 

[dougcjohn]

I am putting in the Audison Prima Plus & Play bundle from TrailSeven with the Power9 and the JL JTW3 with the Additive car audio enclosure. I'll let you know when it's complete in a couple of weeks.

On the 10" Sub, that very good too... I've compared it the Rockford Fosgate T1S2-10S. (10S Sealed or 10P Ported).

https://rockfordfosgate.com/products/details/t1s2-10s/

 

[dougcjohn]

I already put in the full sound skins package. It made a big difference in noise. I’m going to have the installer put in both the audison and the JTW3 at the same time.

Oh nice to hear, so it was worth the time time & cost for the SoundSkins.
Good to know.

 

[Nahdud829]

I posted a pic of how its mounted over here:
https://www.bronco6g.com/forum/threads/hi-all.69025/page-12#post-2827874

It mounts on the factory box, it is the only aftermarket amp that does this. It is also directly intergrated into the factory a2b bus same as the outgoing K2.
Its the most advanced bronco amp replacement on the market by a country mile.

If you are in Socal some listen to our demo truck!

Where in SoCal?

Sponsored