What’s all needed to have color changing ambient lighting?

[JoeSpeed]

Can’t wait, Whaddya think @Milzy90

Sponsored

 

[Barlos]

I hope I can get this done on my Basesquatch

 

[Optimus Bronco]

I know I’ve seen a post where someone was staying the type of led or wires needed to actually have the ambient lights change color. I can’t find it now. I have it all enabled in forscan with the my color screen. The question is the bronco even capable of this? If I bought rgb led’s or less from an older F150 to install can it be done? I don’t really want to go full aftermarket setup since I already have the ambient lights.

Hi Guys,
I cant find where to enable the colors on my 22OBX. Can you tell me how you did it. Here is what my screen options are with forscan.

 

[‘21OBX]

I hope I can get this done on my Basesquatch

The base doesn’t have ambient lighting so make sure to check for wiring and use a voltmeter to see if you have lower before you buy anything.

 

[‘21OBX]

Hi Guys,
I cant find where to enable the colors on my 22OBX. Can you tell me how you did it. Here is what my screen options are with forscan.

This should have everything you need as I can’t remember off the top of my head.
https://www.bronco6g.com/forum/threads/color-changing-ambient-lighting-using-ford-oem-parts.42484/

 

[Optimus Bronco]

I don't have apim option. Where does that show up at?

 

[‘21OBX]

I don't have apim option. Where does that show up at?

Click here

 

[Optimus Bronco]

Sadly I did and the only sections that show up are what you see there. There is no apim option

 

[‘21OBX]

Sadly I did and the only sections that show up are what you see there. There is no apim option

The screen you are on looks like the one just above it with the wrench. Do you have the extended license even the trial version? It might. It show up without it.

 

[FG123]

My has the bracket put nowhere to plug then in. I must need a harness to plug in the lights. Does anyone have an idea where the harness gets connected. The part for the light is # S2DZ-14A411-A

 

[FG123]

Finally got the led’s in the mail. Making progress next to add cup holder ambient lighting and under seat for the rear footwell. Probably take another month for those to get here. (Took a month for the two front ones to show up.)

Was the harness there to plug in the lights? I have a 2025 biggen. I bought the light like the one you are showing. The brackets are also there, but no place to plug them in. Any help would be sincerely grateful

Sponsored