Fire extinguisher recommendations? Rear mounted options?

[Area51BS]

Might be wrong section. Looking for rear mounted mounted extinguisher recommendations that require no mods. It could be life saving.

Sponsored

 

[Deleted User 5719102]

https://www.amazon.com/Jimen-Bronco...pY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1

 

[Ohnoohnoooo]

I have this:
Adjustable Strap Bracket Mount https://a.co/d/asrhdOk
I strap a 2.5 lb extinguisher to it. I also keep a small one under the front seat.

 

[Who iz]

Also have two mounted, but both are secured on each side in the back, so can access either for quick release even when loaded with gear. Oregon summers require preparing for fire risks.

here is one I use, it is very secure and easy for anyone to use:
https://powertank.com/collections/brackets/products/quick-release-fire-extinguisher-bracket

 

[rainman23]

Also have two mounted, but both are secured on each side in the back, so can access either for quick release even when loaded with gear.

here is one I use, it is very secure and easy for anyone to use:
https://powertank.com/collections/brackets/products/quick-release-fire-extinguisher-bracket

Do the holes actually line up with the pre drilled holes in the roll bar?

 

[Who iz]

Do the holes actually line up with the pre drilled holes in the roll bar?

Short answer no....But very easy to mount on any number of panels. Will post an image when I have light for the image and have the time. Takes no skill just time to secure it well, so no rattling on the trails.
***
Sorry OP...But perhaps small modifications are ok?

as promised> cargo area dual mounted extinguisher images:

 

[BCKMRKR]

Not sure what you mean by no mods. No drilling, just replace tailgate panel with Molle panel. Added benefit is that it is out of sight. Not cheap though.

https://coursemotorsports.com/collections/quick-release-fire-extinguisher-mount

Black/black quick release, black Halotron, and Molle panel for my tailgate. Easy install, almost completely vibration free (the top pins/zip ties of the extinguisher need to be kept from slightly moving with a rubber band or hair scrunchy).

 

[Area51BS]

https://www.amazon.com/Jimen-Bronco-Extinguisher-Compatible-2021-2023/dp/B0BPCT5JXM/ref=sr_1_1_sspa?crid=2N3GFBJDLSVET&keywords=2022+ford+bronco+fire+extinguisher+mount&qid=1683160825&sprefix=2022+ford+bronco+fire+extenguisher+mount,aps,137&sr=8-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyWlNEQUw3SUxFSEoyJmVuY3J5cHRlZElkPUEwMTc0ODUwMzZQN1RQVFZFNDVISiZlbmNyeXB0ZWRBZElkPUEwMDE1OTY3MklXMVVTRVVLRUU2MCZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1

This is a good option.

 

[Wildfire1]

I mounted a fire extinguisher on each side of the rear bar. I cut a couple of brackets on the CNC that fit the existing threaded holes in the bars and simply bolted them on.

 

[THE Buckeye Bronco]

Heare's what I did: Buckeye brand (obviously) 2.5Lb extinguisher mounted with Rough Country's fire extinguisher mount. Utilized the bolt hole on the roll bar and one of the T50 bolts from the hardtop bolts as I had installed Rock Workx thumb screw quick removal fasteners. Then a plastic plug in the other existing hole just for alignment.

 

[Combustion_King]

If you guys get cheap plastic ones, be sure to check them often, they do leak, and I’m sure the conditions off-road, higher chance of damage. Safety first! Lol

 

[mcinfantry]

I couldn’t pass it up at 60% off

and no residue

 

[BroncoAZ]

I couldn’t pass it up at 60% off

and no residue

Link? Looks like 4WP, but I can’t seem to find it on their site. I would like to get another at that price.

 

[mcinfantry]

Link? Looks like 4WP, but I can’t seem to find it on their site. I would like to get another at that price.

It was 4wp
I check about once a week and will buy another as soon as I catch that sale again

 

[mcinfantry]

I missed that by a day

Sponsored