Sponsored
Hemisfear's latest activity
-
Hemisfear reacted to Jason519's post in the thread E load vs C load tires - what's your pick? with
Haha.
🤣🤣 -
7MT is nice - the 2.3 hate is not justified Badlands can also be optioned with the electric swaybar disconnect But apart from some...
-
Hemisfear reacted to jzweedyk's post in the thread E load vs C load tires - what's your pick? with Haha.
Also, don't use Goodyear tires. When they introduced the Kevlar ones, a lot of people switched. Two years later no one used them. Bfg...
-
Hemisfear reacted to Oldhippie's post in the thread E load vs C load tires - what's your pick? with Like.
D load for me is the “sweet” spot…C is too fragile & E is too stiff
-
Hemisfear reacted to Murg's post in the thread Recall 26S55: 2021-2026 Bronco - Engine Compartment Wiring Harness Repair [July 23, 2026] -- 590,000k units affected with Haha.
I do them all separately. It’s all a new service visit and keeps me in fords Blue Tier status. 😁
-
Hemisfear reacted to AMCheese's post in the thread 👋 Hi Bronco family! Let’s build better gear together with powoq! with Love.
Something that would allow hardtop owners to remove or open side windows a crack on the hardtop. Also a quick remove kit for the rear...
-
Hemisfear reacted to Rivers90's post in the thread What tire pressure are Sasquatch people running? with Haha.
On road 32-35 PSI Off road 17 PSI
-
Hemisfear reacted to Rivers90's post in the thread What tire pressure are Sasquatch people running? with Haha.
On road 32-35 PSI Off road 17 PSI
-
Hemisfear reacted to Onestepmore's post in the thread What tire pressure are Sasquatch people running? with Like.
I run 39 PSI consistently...and Ive gotten consistent wear with 5000 mile rotation at 20K miles. my dealer mechanics insist what I've...
-
Hemisfear reacted to Tonka Bronka's post in the thread E load vs C load tires - what's your pick? with Like.
Even pulling a max capacity off grid camper, my C rated Toyo AT's in 285/75 work fine. I personally can't see a situation where you...
-
Hemisfear replied to the thread E load vs C load tires - what's your pick?.Definitely D-Load for me! lol
-
Hemisfear reacted to Ducati1098's post in the thread 2.7 oil pump belt failed at 254,577 mi (Reddit post) with Like.
I don’t think he was implying either use timing belts
-
Hemisfear reacted to Ducati1098's post in the thread 2.7 oil pump belt failed at 254,577 mi (Reddit post) with Like.
This is not necessarily true. While it is the way Ford says to do it, the engine does not need to be removed if you know what you’re doing.
-
Hemisfear reacted to HighVelocity's post in the thread Overlanding Bluetti EB55 Battery Mount / Custom Shelf with Like.
Delta 2 Max that's pretty much lived there for about 2 years now.
-
Hemisfear reacted to Ducati1098's post in the thread PSA: Ford Performance ProCal -- 25% Off via Ford (Code: POWER25) with Like.
May want to reach out to Ford directly, because the people you’re tagging isn’t actually Ford
-
Hemisfear reacted to telenerd's post in the thread 74WELD Steering Rack Clunking - Check Yours! with Like.
I’m so glad I didn’t fall to the hype. Still rocking my Hoss 2.0 in my Badlands. I saw George from Trail Militia beats the hell out of...
-
Hemisfear reacted to Desmolicious's post in the thread 2.7 oil pump belt failed at 254,577 mi (Reddit post) with Haha.
You soak your tires in oil?
-
Hemisfear reacted to Brian_B's post in the thread 2.7 oil pump belt failed at 254,577 mi (Reddit post) with Like.
Ouch. I think at that point I'd just look at dropping in a complete reman or something.
-
Hemisfear replied to the thread Overlanding Bluetti EB55 Battery Mount / Custom Shelf.Pics or it never happened! lol
-
You do realize that "oemfordpartsdirect" is not Ford, correct..? Had you just used Ford's actual parts website, none of this would've...
-
Hemisfear replied to the thread Diode Dynamics Chase Light Is Here.Hi Jason, I lead the wiring through the roof rack and down through the hole i drilled behind the rack mount
-
Hemisfear replied to the thread Ford Performance Winch with Sensors (ACC, Camera, and Parking) Works Fine; Parts List and Photos.It looks to be sitting a bit low...
-
Hemisfear reacted to itwelder's post in the thread Is it the glass... or the windshield angle? with Like.
That's not the answer. My windshield took a small rock and chipped in the middle of nowhere, Utah. The only vehicle was a small car...
-
Hemisfear reacted to Montana Bronco's post in the thread Is it the glass... or the windshield angle? with Haha.
^^ QUOTED FOR TRUTH. ^^ 3 years and 45K miles with 50 percent of those miles on washboard dirt roads here in Montana. ORIGINAL...
-
Hemisfear replied to the thread Is it the glass... or the windshield angle?.That's because your CJ's can't get enough speed to make a contacting rock break the window! lol
-
Hemisfear reacted to Sandy56's post in the thread The Repair Lasted Exactly One Rainstorm with Love.
Ah my favorite type of person that I work with. The one who won’t do a little leg work and just complain that something doesn’t work but...
-
Hemisfear reacted to BroncoChallenger's post in the thread The Repair Lasted Exactly One Rainstorm with Haha.
How many posts about this are you going to make? You've made several here, and one over on FTE. Are you taking the panels out at all...
-
Hemisfear reacted to Oilbrnr's post in the thread Building the Ultimate ARB Front End on Your Ford Bronco: Bumper, Lights, and Air with Like.
You come out West and log a couple hundred miles of washboarded, rock loaded roads, you'll be wishing you'd have lowered your tire...
-
Hemisfear reacted to Nibroc99's post in the thread ESPN draft analyst has arm amputated after horrific Bronco crash with Love.
Let's clarify - he is the at-fault party. Whether it was his actions or a mechanical failure is unclear, but it's unlikely that it's a... -
Hemisfear reacted to MayhemMike's post in the thread ESPN draft analyst has arm amputated after horrific Bronco crash with Haha.
It states he crossed the line and drove into the semi.
-
Hemisfear reacted to EquusBronsis's post in the thread Using OEM Kick Panel Speakers in Metra Pods with Like.
Comment was addressed to original OP......
-
Hemisfear replied to the thread Using OEM Kick Panel Speakers in Metra Pods.As an audio technician in a previous life, I think we'll be just fine thank you...
-
Hemisfear replied to the thread Using OEM Kick Panel Speakers in Metra Pods.I just picked up a pair of Cpx165's for 30% off and my Metra pods just landed this morning...I think I'm going to need some tuning soon!
-
Hemisfear reacted to Brian_B's post in the thread Using OEM Kick Panel Speakers in Metra Pods with Like.
If you are going to the trouble of buying 6.5" rear pods - go ahead and dump another $70 on a set of Hertz or Infinity coax speakers to...
-
Hemisfear replied to the thread FYI - Mobridge amp users.I've been using GOOGLE AI...
-
Hemisfear replied to the thread Need advice: Bilstein 5100 vs. 6112 (or mixed setup).This seems informative...
-
Hemisfear replied to the thread Using OEM Kick Panel Speakers in Metra Pods.Depending on the system...I have the B&O and my kick panel speakers are only woofers, no tweeters, so I'm not sure that would be much of...
-
Hemisfear reacted to EtiownBronco's post in the thread Ford dealer just replaced two 35” Goodyears with Haha.
Those are the newer version found on 25 and newer models. Better tire IMO
-
Hemisfear reacted to 23OBX2.7's post in the thread Ford dealer just replaced two 35” Goodyears with Like.
Incompetence!!
-
Hemisfear reacted to NeBlackshirts's post in the thread Ford dealer just replaced two 35” Goodyears with Like.
Went out and looked a little more and they put RT on the back instead of the MT Goodyears
-
Hemisfear reacted to HPNQ420's post in the thread Need advice: Bilstein 5100 vs. 6112 (or mixed setup) with Haha.
Hoss 2.0 takeoffs for $400: You are gambling with premature failure and you have no idea if you are getting the proper spring rate...
-
Hemisfear replied to the thread ARB Summit Winch Bumper vs Zenith Non-Winch Front Bumper: Which Is Right for Your Bronco Build?.I'd have to say no to both...they look very bulky and weigh too much...
-
Hemisfear reacted to Snacktime's post in the thread ARB Summit Winch Bumper vs Zenith Non-Winch Front Bumper: Which Is Right for Your Bronco Build? with Haha.
Can I trade you some bent ARB sliders for a bumper?
-
Hemisfear replied to the thread Need advice: Bilstein 5100 vs. 6112 (or mixed setup).I had no issues reaching 70 mph on the Moab off rodeo sandy two tracks. This was a stock Badlands 4 door with HOSS 2.0. I have the same...
-
Hemisfear reacted to 23OBX2.7's post in the thread Need advice: Bilstein 5100 vs. 6112 (or mixed setup) with Haha.
The brake dive. squat and body lean was bad on my OBX and the post bump bounciness was too much.
-
Hemisfear replied to the thread Looking for rubber plugs.I suggest measuring it and looking on Amazon!
-
Hemisfear replied to the thread Need advice: Bilstein 5100 vs. 6112 (or mixed setup).The 5100's are definitely a down grade from the Badlands stock, position sensitive shocks, the 6200's are arguably a bit better with...
-
Hemisfear reacted to dkittel's post in the thread Need advice: Bilstein 5100 vs. 6112 (or mixed setup) with Haha.
For what it's worth, we replaced all four of our stock bilsteins with 5100s on our 2025 non-SAS Badlands at about 5k miles after a...
-
Nice ! Now you need to get the FORD in Evergreen; that will complete the look! Love the gator on the back. -
Hemisfear replied to the thread 2029 GMC Jimmy coming with V8, BOF, removal roof, retro styling to take on Bronco.I don't believe GM has produced anything solid in years...