Sponsored
87-Z28's latest activity
-
87-Z28 reacted to SierraBronco's post in the thread Seeking Feedback Pros/Cons from Those Running an Ultimate Dana 60? with
Like.
The OX locker is beef. Should hold up to your 800 horsies though I feel like you have something else planned -
Since you have the Fox shocks, which I thought were linear but one person mentions they could be progressively valved (never heard of a...
-
87-Z28 reacted to BigMeatsBronco's post in the thread Installed 5.38s and Spicer Ultimate 44 FDU and Extreme CVs 32 spline with Sad.
So maybe dana spicer is coming out with a "super 44"? I've lost 50 yrs of faith with Spicer, after realizing they sell the Ultimate-60...
-
87-Z28 replied to the thread Looking for some advice of a suspension lift kit 2025 big bend non sas.Adding an unpopular opinion here. Control arms and links are not necessary for 99% of users. And not necessary for 2” lift. They are...
-
87-Z28 replied to the thread Looking for some advice of a suspension lift kit 2025 big bend non sas.Always lots of opinions here. I am going to echo this. For your use case the Bronco is already a perfect platform and doesn’t need much...
-
87-Z28 reacted to Fordified1's post in the thread Looking for some advice of a suspension lift kit 2025 big bend non sas with Like.
The Eibach’s are a great choice for what you’re wanting to do. Skip the tie rod sleeves. Don’t need aftermarket upper control arms or...
-
87-Z28 reacted to SierraBronco's post in the thread TeraFlex Pneumatic Dual-Rate Sway Bar for Bronco with Love.
How do I install this on the rear axle…🤔
-
87-Z28 reacted to SierraBronco's post in the thread TeraFlex Pneumatic Dual-Rate Sway Bar for Bronco with Love.
I don’t want to void my warranty though
-
87-Z28 reacted to JediMcMuffin's post in the thread TeraFlex Pneumatic Dual-Rate Sway Bar for Bronco with Sad.
You don't, you convert to a RockJock 4-link back there and move on with your life. Caveat: it requires dropping the axle and welding...
-
87-Z28 reacted to Fordified1's post in the thread Is the JKS max clearance kit always necessary for 37 tires? with Love.
I have those stinky fab body mounts. Haven’t had time to do it yet, and I agree, you don’t want just any yahoo welding on your frame...
-
87-Z28 replied to the thread GIVEAWAY ALERT! TeraFlex 3.5" RT3 Suspension System with Falcon Fast-Adjust Coilover Shocks.What are extended and compressed lengths of these, front and rear? What spring rates, front and rear?
-
87-Z28 reacted to crenca's post in the thread NOW AVAILABLE: BOSS "Walker Link" Sway Bar Shock System - Great alternative to disconnects! with Like.
Huuummm, would the extra articulation that they provide really be significant? If I recall my numbers correctly, the extra...
-
87-Z28 reacted to f1loco's post in the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi with Like.
Load E - set them at 32 and drive it like you stole it. ;)
-
87-Z28 reacted to dgorsett's post in the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi with Like.
This I believe to be fact after clearing all the fog. My stock BB with 255 SL Duelers the sticker said 35psi. I switched to 265/70x17...
-
87-Z28 reacted to crenca's post in the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi with Like.
^This^ That, and the fact that almost all these various recommendations the OP was getting (especially the one about how he needed to...
-
87-Z28 replied to the thread The 5-tire PERFECT rotation schedule for MAX tread life and value..Rotate every 1/2 mile and choose any random ass pattern you can come up with after a twelve pack. Tire wear will be guaranteed to be...
-
87-Z28 reacted to dgorsett's post in the thread NOW AVAILABLE: BOSS "Walker Link" Sway Bar Shock System - Great alternative to disconnects! with Haha.
Love me some stickers...;
-
87-Z28 reacted to dgorsett's post in the thread NOW AVAILABLE: BOSS "Walker Link" Sway Bar Shock System - Great alternative to disconnects! with Like.
Thanks... this is the bottom line for me, hate to use that locker when I shouldn't have to.
-
87-Z28 reacted to Nanook's post in the thread NOW AVAILABLE: BOSS "Walker Link" Sway Bar Shock System - Great alternative to disconnects! with Sad.
The fact that you revisit this every 6months answered your own question. Leave it stock. Add some lights or stickers.
-
87-Z28 reacted to ThunderFlash's post in the thread NOW AVAILABLE: BOSS "Walker Link" Sway Bar Shock System - Great alternative to disconnects! with Like.
You won't be a flex monster with the links, but they do free up the front a bit. I added the OEM rear bar buying used off eBay to get...
-
87-Z28 reacted to dgorsett's post in the thread NOW AVAILABLE: BOSS "Walker Link" Sway Bar Shock System - Great alternative to disconnects! with Sad.
No rear sway bar.
-
87-Z28 reacted to dgorsett's post in the thread NOW AVAILABLE: BOSS "Walker Link" Sway Bar Shock System - Great alternative to disconnects! with Like.
Thanks to @87-Z28 for the great technical explanations , I revisit this thread every 6 months expecting an answer to this : "Best of...
-
87-Z28 reacted to SierraBronco's post in the thread NOW AVAILABLE: BOSS "Walker Link" Sway Bar Shock System - Great alternative to disconnects! with Like.
Can’t say much on longevity, but you’ll like the improved ride. You won’t notice the body roll if you have a rear swaybar
-
87-Z28 reacted to Valhalla's post in the thread Ford Bead Lock Capable Wheel’s Question, Thanks! with Haha.
Don't yell at me.
-
87-Z28 replied to the thread Ford Bead Lock Capable Wheel’s Question, Thanks!.It’s not just you. He is angry with the whole world.
-
87-Z28 reacted to Valhalla's post in the thread Ford Bead Lock Capable Wheel’s Question, Thanks! with Like.
Yes, many do, just be careful breaking them free as they are reported to strip out easy. Seems like it is a TP 40 or 45.
-
87-Z28 replied to the thread Ford Bead Lock Capable Wheel’s Question, Thanks!.I got some of these to replace stock nonSAS wheels, greatly reducing my build credibility. No power tools and take your time with the...
-
87-Z28 reacted to CitrusBronco's post in the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi with Like.
I did some reading today and I’m going with this is a non issue. It would be a fun project to measure temps and psi, maybe some day.
-
87-Z28 replied to the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi.I am sure you could see some interesting trends just measuring surface temps. Agree that this all seems very silly. It would be hard...
-
87-Z28 reacted to Smocaine's post in the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi with Love.
I will gladly save your life from those deadly Baja Bosses. I won't even charge you a tire disposal fee. Just let me know when and where...
-
87-Z28 reacted to CitrusBronco's post in the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi with Like.
Why not grab a laser thermometer and go for a drive and measure tire temperature. Would be real easy to see what effect psi has on...
-
87-Z28 replied to the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi.@kodiakisland. Curious what your thoughts are on this?
-
87-Z28 reacted to EasternSierra's post in the thread MT Baja Boss AT 255/85 R17 - MT recommends 52-55 psi with Like.
The only Baja Boss pizza-cutter is the 255/85R17 in load range E.
-
87-Z28 replied to the thread E load tires are way overkill.Don’t put bits and pieces from the tires into your shocks. They tend to get stuck in the valving holes and cause improper compression...
-
I am wondering what you are after with your copy-pasted AI message
-
87-Z28 replied to the thread Diff Drop with 37s - Have you had any problems with your CV axles.This thread reminds me… I was going to make some brackets to drop the steering rack instead of putting in a hoss 3.0 rack. Those tierod...
-
87-Z28 reacted to Brian_B's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Haha.
Wait what? What is this nonsense? You have your priorities backwards Mister.
-
87-Z28 reacted to userdude's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Like.
I think Andy is saying it's a tradeoff which is one he's not keen on, since he sees the added gain in down travel closer to the red line...
-
87-Z28 reacted to SierraBronco's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Haha.
Gonna influence so hard
-
87-Z28 replied to the thread Diff Drop with 37s - Have you had any problems with your CV axles.Diff Rise is the new diff drop. Skip UFDU, mount shinny aluminum M190 on the hood. Not just correcting geometry but improving it. How do...
-
87-Z28 reacted to SierraBronco's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Love.
That’s like accessorizing without getting aftermarket wheels. Nobody can see the UFDU. It’s a silly accessory.
-
87-Z28 reacted to userdude's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Like.
My plots came out different. 🤔
-
87-Z28 replied to the thread Diff Drop with 37s - Have you had any problems with your CV axles.Not really. Both our plots achieve the same level of understanding by the viewer. Just to be clear. There is a general acceptance that...
-
87-Z28 replied to the thread Diff Drop with 37s - Have you had any problems with your CV axles.A small diff drop (1”) keeps plunge in check (<10 mm) and is no concern. It will reduce CV angles across the board, both at droop and...
-
87-Z28 reacted to Oldhippie's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Like.
You guys are talking way over my head but the innovation diff drop I have was to address CV angles at droop with my original spacer lift...
-
87-Z28 replied to the thread Let's talk lights. How much lighting needed? I need suggestions..Have you ever seen Chevy chase griswold Christmas? Not enough lights IMO.
-
87-Z28 replied to the thread Where is jack location for rear ford bronco?.Minivan CG in for-aft direction for oem sas is 51.6” behind front axle and 64.5” in front of rear axle. I have put Jack stands very near...
-
87-Z28 reacted to Brian_B's post in the thread Where is jack location for rear ford bronco? with Like.
Yeah works fine. Anywhere along the frame rail there is safe to jack and/or use jackstands. Just watch as you get near the center, you...
-
87-Z28 reacted to SierraBronco's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Love.
He is very thorough. He’d never worked with the 32 spline axles or UFDU so I had to send him the axles and he tore them apart for angle...
-
87-Z28 reacted to Brian_B's post in the thread Diff Drop with 37s - Have you had any problems with your CV axles with Haha.
No I agree with your posts. If I didn't already have one, I wouldn't look at putting one in necessarily. But if it's already there...