*** DIRT MOUNTAIN Broncos - Built, Shipped, Delivered Tracker***

[Krmparkguy]

11/04 Update - Another solid day with 6 being released, all August blends going as far as an 08/12! Shall I say there is a light at the end of the tunnel here? Still distant but we're getting there!

Special Note - This brings us down to 78 left in Dirt Mountain. At 6 a day we'll have it empty by Mid-November. Hopefully this is a tad earlier that what some expected based on the Roof Replacement emails Ford sent last month (definitely a lot later than what all of us had originally wanted though).

And as always - If you have found this information useful, consider "Buying me a Beer", and a big shout out again to all those who already have, Cheers! !

Thats great news, Thank you

Sponsored

 

[EquusFerus]

Insurance agent: “Wow, you have the VIN memorized?!”
Me: “I must be the first 2021 Bronco owner you’ve dealt with.”

 

[TN Bronco]

One of the old guard has officially been paroled. First hour, first edition reservation, 7/16 build, and nearly in the final 10 left in confinement. ETAs updated yesterday morning and received “built” email at 2:51 AM today. No shipped notice yet, but an oddly aggressive delivery estimate of 11/1-11/7.

I make no promises to stop whining, but I’ll take a break for the day. Here’s hoping the rest of the 100+ day group get out this week.

I went 3 days with no whining, but it’s about time to start up again. Still no word on shipping. How long is it taking convoy vehicles to ship out lately? ETA oddly still at 11/7 with 6 transit days.

 

[BroncoMiami]

Picked up yesterday. 67 miles on odometer. Already put on new shoes, emblems and changed the 4" speakers. MIC 2.0 top looks good. Great vehicle!

 

[KANE COUNTY ILLINOIS]

Picked up yesterday. 67 miles on odometer. Already put on new shoes, emblems and changed the 4" speakers. MIC 2.0 top looks good. Great vehicle!

Looks sharp! Love the Bronco emblem on the front quarter panel!

 

[VoltageDrop]

It has to be the active grille shutter rewire. I'm convinced 100%. They are burying it with the MIC fiasco. It's a bumper off rework. And it's happening all evening long after second shifts.

Edit: I believe it was incorporated into the line mid-August, which is why you see late August builds and after rolling right out the door.

Well, here's a little fuel for that fire. I took my bumper off tonight to take measurements and I noticed the bolts had been removed before which reminded me of your post so I checked my shutter harness and it wasn't even made until 8/30/21. This is a very plausible theory for the delay on the soft top rigs!

Looks like the updated harness part number is m2dt-15a211-ab

 

[Elonmsk]

Well, here's a little fuel for that fire. I took my bumper off tonight to take measurements and I noticed the bolts had been removed before which reminded me of your post so I checked my shutter harness and it wasn't even made until 8/30/21. This is a very plausible theory for the delay on the soft top rigs!

Looks like the updated harness part number is m2dt-15a211-ab

Wow, just wow. This is great intel and might explain why my 7/23 build is still without an update.

 

[Chaos_273]

@mpeugeot im about to send you a DM with my VIN if you don’t mind working your magic on it. I tried the sites listed but nothing happened when I entered my VIN and I couldn’t find a place to register my email.

I do have a shipped confirmation from Ford.

Many thanks if you can do it! If not, no worries there either.

 

[KANE COUNTY ILLINOIS]

@mpeugeot im about to send you a DM with my VIN if you don’t mind working your magic on it. I tried the sites listed but nothing happened when I entered my VIN and I couldn’t find a place to register my email.

I do have a shipped confirmation from Ford.

Many thanks if you can do it! If not, no worries there either.

Same here!! I couldn't find a place to enter my email, so I sent my email, too! Unfortunately, my VIN didn't come back with any info! Good luck!

 

[mpeugeot]

Well, here's a little fuel for that fire. I took my bumper off tonight to take measurements and I noticed the bolts had been removed before which reminded me of your post so I checked my shutter harness and it wasn't even made until 8/30/21. This is a very plausible theory for the delay on the soft top rigs!

Looks like the updated harness part number is m2dt-15a211-ab

But that would make sense... I was not surprised to see that someone would find proof of what shenanigans were going on.

 

[mpeugeot]

@mpeugeot im about to send you a DM with my VIN if you don’t mind working your magic on it. I tried the sites listed but nothing happened when I entered my VIN and I couldn’t find a place to register my email.

I do have a shipped confirmation from Ford.

Many thanks if you can do it! If not, no worries there either.

Sadly, my Google-Fu has failed me tonight... I checked everywhere I could and researched just about everything... the only thing I couldn't get was answers. I even downloaded your window sticker to get the exact spelling for your dealership name to narrow down the possible dealer codes to search Cassens, United Road, and Palsapp as thoroughly as I could.

 

[mpeugeot]

Same here!! I couldn't find a place to enter my email, so I sent my email, too! Unfortunately, my VIN didn't come back with any info! Good luck!

Yep, I was 0 for 2 tonight. I mean I have everything down to dealer names, order numbers, start and end ETAs, hell - on some of these dealers I even have cell phone numbers for the damn dealerships. I couldn't find rail cars, pre-delivery load numbers, or any delivery receipts on any of those shippers listed above. I don't know all the shippers that are possible, I only started learning my way around yesterday and today, so I have a lot to learn to be more effective at finding the buried bodies.

I might add, I am not "hacking" anything, I am just pulling from publicly accessible databases and/or inspecting the raw responses from the webpages I am visiting. I don't want anyone to think that I am up to anything nefarious.

 

[mpeugeot]

Papa Smurf, you're shipped, but I couldn't find anything for you either.

 

[Ioiwachief]

9 minute reservation on 7/13/2020…

I have a feeling I’ll be one of the last 20 on dirt mountain. Blend was 8/13… but the modules loaded 8/16.

congrats to all that got off dirt mountain!

Im the same as you as far as blend and modules.

 

[RednWhite89]

Well, here's a little fuel for that fire. I took my bumper off tonight to take measurements and I noticed the bolts had been removed before which reminded me of your post so I checked my shutter harness and it wasn't even made until 8/30/21. This is a very plausible theory for the delay on the soft top rigs!

Looks like the updated harness part number is m2dt-15a211-ab

The part that gets me is that if Ford just communicated that they were making my car better, I'd be quite willing to understand given it's a first model year. Dare I say might even be happy to wait a little longer. Not 13+ weeks longer, but a little longer.

Sponsored