7/15 Blend Date Folks

[Carolina Jim]

I could not access the file, got an error code

That means your Bronco was accidentally crushed on the assembly line

Sponsored

 

[jmalinov]

I could not access the file, got an error code

i need someone smarter than me to figure it out, ha!

 

[BudgetBronco]

I could not access the file, got an error code

I cannot access either but please add me: 7/15 #6137

 

[ApexNCBronco]

rotation #5520 blend date 7-15. Just emailed my dealer and asked them to check on their end. Here is the reply. Hopefully this helps some of you guys looking for more info. Still no updates on my tracker but dealer has confirmed.

“Good news, yes your Bronco has been built. In dealer visibility the latest update was entered yesterday (7/15/21) and your vehicle shows as "In Plant - Produced." That means the build is finished, but it is still undergoing final plant QC checks, and some finishing touches before plant release. The next update we can see will be when it is "Released to Carrier" and then there will usually be a dealer ETA window. There is no ETA showing now in visibility. Since these come by rail that window is generally 7 to 10 days as rail schedules vary”

 

[ajdavis19]

Hi all,

Fun fact, you can check your rotation # as well to further help you track its progress.

Rotation number restarts at 0 once it hits 9999. We are rumored to be at ~3500 right now.

Also, Rotation number tracks both Bronco and Rangers in the same sequence so don't go et discouraged if your number is still a bit away, it'll be closer than you think!

Dumb question but where can you find your rotation number?

 

[5280Bronco]

7/15 Blend, 6088 Rotation. I'm consumed, I keep checking. have module, no build date on my tracker, no sync. I'll keep everyone posted, I seem to be on the later side of 7/15

Hang in there! I understand. For me, yesterday was even more filled with checking the forums and all the ford sites for information to populate.

 

[CO-Bronco]

Dumb question but where can you find your rotation number?

On your Window Sticker

 

[zeos386sx]

7/15 5583

Tracker in production 7/15
Sync updated 7/15, no module info
No built email

 

[jmalinov]

im sorry yall-- i can't figure it out. i'll post it the updates here if anyone wants to take over and make a shared sheet:

Member ID	Rotation Number	Module?	Sync?	Built email?
@ApexNCBronco	5520			received 7/16
@zeos386sx	5583		yes
@Evolkidbell	5685
@noladead	5729			received 7/16
@Apugh67	5759	yes
@Carolina Jim	5790
@Shamrocklax03	5872	yes	yes
@Jrrank	5945
@Nu2Fordz	6088	yes
@jbrentd	6118
@Timinpgh	6137
@g8rb8t	6209
@jmalinov	6222
@Tricky Nick	6520

 

[Carolina Jim]

im sorry yall-- i can't figure it out. i'll post it the updates here if anyone wants to take over and make a shared sheet:

Member ID	Rotation Number	Module?	Sync?	Built email?
@ApexNCBronco	5520			received 7/16
@zeos386sx	5583		yes
@Evolkidbell	5685
@noladead	5729			received 7/16
@Apugh67	5759	yes
@Carolina Jim	5790	no	yes
@Shamrocklax03	5872	yes	yes
@Jrrank	5945
@Nu2Fordz	6088	yes
@jbrentd	6118
@Timinpgh	6137
@g8rb8t	6209
@jmalinov	6222
@Tricky Nick	6520

 

[ajdavis19]

On your Window Sticker

Thanks. I did some research and found that after I sent the question smh. Next question would be...how do you know what rotation Ford is on?

 

[Evolkidbell]

@jmalinov

mark me yes for module and sync

 

[jmalinov]

@jmalinov

mark me yes for module and sync

 

[5280Bronco]

@jmalinov Sorry, i would add myself if i could figure out how. Blend date of 7/15, rotation 5826, yes for both module and sync.

 

[Rhino67]

No idea how to add myself either lol. But both module and sync update.
5895

Sponsored