What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Fastmc25]

You guys are out here doing impressive stuff to your rides. Im out here installing a tire cover lol.

I like it cause it looks like the 80’s one.

I have this one also

Sponsored

 

[BUCKYBRONCO2021]

I have this one also

Nice! I went with the gray letters. Almost went with that one. I like it!

 

[wakblak]

I did the same. I disconnected the clamps and connected the wires directly to the terminals. No need for cutting the wires, just tie and tuck the excess somewhere. My battery has maintained the charge after 3 years.

Where did you route the power plug?

 

[Alassise]

Where did you route the power plug?
I bolted the Genius 5 to the air filter box. The power cord runs out to the garage outlet on that side (passenger side). I have to open the hood to connect it to the outlet. I guess that you can run it down to the fender and thru the firewall as the cable is long enough, but I did not want to cut anything. When not connected I just tuck and wrap the wire inside the engine bay. Hope this helps.

 

[cynicalrider]

I ordered from their amazon store.

Amazon.com: Air Lift 57269 LoadLifter 5000 Air Spring Kit for Ford Bronco (2021-2024) : Automotive

Would you ever do cradles so you don't lose droop? That is the plan for me since that's what I have on my Tacoma but it seems the bolt in solution makes it hard to adjust the cradle in the right spot. But I have no problem fabricating a different mount to get it exactly where it needs to be.

 

[Big Boss]

Finally got it back from the dealer after having some warranty work done. Glad to have it back, but pissed I missed our first big snow of the year!

 

[Lotus Dave]

Drove in the rain and did not get a "Powertrain Malfunction/Reduced Power" message

 

[PowerBronco]

Added an IAG mini bull bar (thanks scratch and dent clearance) and some diode dynamics lights I bought last year black Friday. Hooked up via the factory fog wiring and added the factory fog headlight switch with forscan updates to enable.

 

[PowerBronco]

Want to do this too.
How did you wire the power plug?

I've just been popping the hood and plugging it in directly. I did buy a 2' extension cord so that I could connect it without having to open the hood, but I haven't figured out the best place for it to exit yet.

 

[wakblak]

I've just been popping the hood and plugging it in directly. I did buy a 2' extension cord so that I could connect it without having to open the hood, but I haven't figured out the best place for it to exit yet.

Did you get the NOCO extension one or something else?

 

[PowerBronco]

Did you get the NOCO extension one or something else?

The NOCO Genius 2D just has a standard 2 prong electrical outlet connection. I just got a 2' - 2 wire standard extension cord to route down to the bumper and exit there somewhere.

 

[Oldhippie]

Got my replacement sway bar disconnect wired up and working…

 

[MidLifeInIL]

Getting ready for the Holidays....

 

[23OBX2.7]

Mounted Hertz EBX 25.5 NOS on tailgate with the two included Hertz horizontal mounting brackets and new M6 rivnuts kit. Seamless.

Experiences Cam phaser rattle yesterday and this AM......

 

[Scedwin]

Threw in some molle panels…

Sponsored