flawless victory
If you feel so inclined, shoot me a dm with your venmo/paypal/whatever. You're doing the lord's work, son.
Sponsored
Sponsored
Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts.
- Thread starter I3lackRose
- Start date
- Watchers 142
If you feel so inclined, shoot me a dm with your venmo/paypal/whatever. You're doing the lord's work, son.
I appreciate it but no worries at all, just giving back to the community! Need to find my next project.flawless victory
If you feel so inclined, shoot me a dm with your venmo/paypal/whatever. You're doing the lord's work, son.
I may use your pics when I post them on makerworld along with mine if you don’t mind.
Yep, have at it!
If anyone needs the files they're now on Maker World
https://makerworld.com/en/models/1887287-bronco-door-pockets#profileId-2021396
https://makerworld.com/en/models/1887287-bronco-door-pockets#profileId-2021396
Any chance someone has designed fog light replacement brackets for the capable bumper? I want to use SS3s but trying to avoid dropping $120 on the brackets.
Sponsored
- First Name
- Ben
- Joined
- Jul 15, 2020
- Threads
- 21
- Messages
- 846
- Reaction score
- 2,686
- Location
- Baltimore, MD
- Vehicle(s)
- 2023 Bronco Raptor
- Your Bronco Model
- Raptor
Just started the first prints on this. I’m so stoked. The nets are useless and the metal replacements are annoying. This multiple pocket solution seems like it’s going to be exactly what should have been there in the first place
- First Name
- Ben
- Joined
- Jul 15, 2020
- Threads
- 21
- Messages
- 846
- Reaction score
- 2,686
- Location
- Baltimore, MD
- Vehicle(s)
- 2023 Bronco Raptor
- Your Bronco Model
- Raptor
Turned out nice! Thanks! I have some more ideas for 3d printed stuff so when I get time I’ll post them as wellThese are so nice. Boosted you on Makerworld. Thank you!
Got tired of the slow wireless charging so I took a step towards improving it. I was inspired by this thread: https://www.bronco6g.com/forum/thre...harger-install-in-factory-location-diy.32069/
The 7MT console is way different than the automatic. I printed the model designed and posted by @KurtHu (https://www.bronco6g.com/forum/thre...ctory-location-diy.32069/page-10#post-1909772) but the factory bracket is different and the holes weren't close to aligning.
I bought a cheapo desk-mount wireless charger ( https://www.amazon.com/dp/B075K3131T) and based everything around the hole it needed.
This thing's pretty rough and I had some issues during the print but it's sufficient for now. I'll be back in there to tidy things in up time, likely also to include a recess so this sits flush and the factory rubber cover can be reused to keep crumbs from falling through the cracks in the console. My truck is filthy enough as it is.
It's not good but it was a fun little project.
The 7MT console is way different than the automatic. I printed the model designed and posted by @KurtHu (https://www.bronco6g.com/forum/thre...ctory-location-diy.32069/page-10#post-1909772) but the factory bracket is different and the holes weren't close to aligning.
I bought a cheapo desk-mount wireless charger ( https://www.amazon.com/dp/B075K3131T) and based everything around the hole it needed.
This thing's pretty rough and I had some issues during the print but it's sufficient for now. I'll be back in there to tidy things in up time, likely also to include a recess so this sits flush and the factory rubber cover can be reused to keep crumbs from falling through the cracks in the console. My truck is filthy enough as it is.
It's not good but it was a fun little project.
- First Name
- Mike
- Joined
- Feb 18, 2024
- Threads
- 24
- Messages
- 230
- Reaction score
- 207
- Location
- San Francisco
- Vehicle(s)
- Bronco
- Your Bronco Model
- Wildtrak
This is probably a very niche model since DirtyDog is no-longer around and their headliners are harder to get. I broke a clip (which are already 3d printed), so I made this model to replace them.
https://thangs.com/designer/flashpunk/3d-model/1459730
https://thangs.com/designer/flashpunk/3d-model/1459730
Sponsored
- Joined
- Dec 15, 2020
- Threads
- 103
- Messages
- 4,851
- Reaction score
- 9,139
- Location
- Portland, Oregon
- Vehicle(s)
- Mustang
- Your Bronco Model
- Badlands
Any chance of getting STEP files so I can tweak the bolt size? Was thinking about using M3 with inserts (because I have them laying around).
I would love them too! Just want to slightly adjust size to fit my too big of a water bottle
- Joined
- Dec 15, 2020
- Threads
- 103
- Messages
- 4,851
- Reaction score
- 9,139
- Location
- Portland, Oregon
- Vehicle(s)
- Mustang
- Your Bronco Model
- Badlands
I'm printing out a sample now, the bottle opening is pretty large (still on the printer). How big is your water bottle? Or is it one of those massive Stanleys on the passenger side...
Exactly. Its not next to me to measure right now..its those 32Oz onces
Also could be nice to try and fit there a dedicated slot for a radio device
Sponsored
