Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts.

[Squatch]

This is kind of a long shot, but wondering if anyone has recreated the dirtydog headliner clips? I bought a used dirtydog headliner from a forum member and cracked one of them - would like to have a set of spares.

There seems to be 3 different types. Not super complex shapes, just wondering if anyone has made created these before I do it myself.

Your post made me hop onto their website because I remembered they sold the full set of mounting clips and hardware for around $30, only to learn that they're closing up shop and clearing out their inventory. I did check and they unfortunately don't have the clips in stock at the moment.

Wonder if you could reach out to them and get the print files? If they're not selling anymore it can't hurt to ask.

Definitely ask for their CAD files, etc.

Sponsored

 

[flashpunk]

Definitely ask for their CAD files, etc.

Yeah I reached out last week and haven't heard back

 

[Bobo1969]

Didn't like the way my spare tire cover flapped around the camera. I tried using a rubber gasket that I picked up at Ace, but it fell off pretty quickly somewhere along the way, so I printed a cap to hold it in place. It fits really snuggly, if not maybe a little too tight.

Hi would you be willing to share the file i would like to print one i have the same problem. Thanks so much

 

[mjcutri]

Hi would you be willing to share the file i would like to print one i have the same problem. Thanks so much

This is the final version that I ended up using. It made it on multiple highway trips and through a car wash in place and unscathed, so I think I'll stick with it. I just push it on as far as it will go.
https://www.thingiverse.com/thing:6443738

 

[Iceman62]

Not quite a "functional" 3D assy, but my son crafted this for my 2009 Mustang Bullitt...thought it looked cool on Bronco dash for the ride home.

 

[Brian_B]

Some simple snap-on covers for the A-pillar vents. This was inspired by @Brian_B frequent complaints that when the HVAC is set to direct air into the foot well, air also flows out the A-pillar vents.

I tested with air on full blast to verify they stay in place and don’t leak or whistle, but I didn’t try it at max heat. Printed in ASA with textured baseplate that nicely matches the Bronco plastic texture. The snap hooks probably won’t last if the covers are frequently removed, but I will probably just leave them in place.

https://www.thingiverse.com/thing:7096243

I just wanted to say --

I was finally able to bribe my son into printing these for me.

So he did it in banana yellow, which of course, matches everything else in my Big Bend interior.

But... color aside --- THIS IS AMAZING AND YOU ARE MY FAVORITE PERSON EVER

 

[DarthLincoln]

I just wanted to say --

I was finally able to bribe my son into printing these for me.

So he did it in banana yellow, which of course, matches everything else in my Big Bend interior.

But... color aside --- THIS IS AMAZING AND YOU ARE MY FAVORITE PERSON EVER

I’m glad your son printed them for you! I was gunna offer to print you a set if you were unsuccessful in your bribe. It’s your idea that I didn’t know I needed - I haven’t removed mine since putting them on.

Just let me know if you get tired of banana yellow and I’ll send you some in carbon black as your “commission”.

 

[SillyPosition]

Anyone got his hands on a 3d model of the bronco?
To fit parts to it, any .step or scan of any sort of format, especially the hard top?

I would like to model a complimentary piece to my roof rack, and it could be much nicer if I had something to work with

 

[ENBRAU]

I made a couple things for a cheap ditch light setup:

https://makerworld.com/en/models/1320987-ford-bronco-ditch-light-spacer#profileId-1357162

Nilight LED Pod Light Cover by hunterhouk MakerWorld: Download Free 3D Models

 

[scrutineer]

Anyone got his hands on a 3d model of the bronco?
To fit parts to it, any .step or scan of any sort of format, especially the hard top?

I would like to model a complimentary piece to my roof rack, and it could be much nicer if I had something to work with

I just scanned mine for a demo.

I teach a high school manufacturing and product development class and I wanted to demo scanning my students.

If people were interested I could scan more.

https://skfb.ly/pAOBV

 

[Russ.Cere]

I just scanned mine for a demo.

I teach a high school manufacturing and product development class and I wanted to demo scanning my students.

If people were interested I could scan more.

https://skfb.ly/pAOBV

I would be 100% interested.

 

[Russ.Cere]

I just scanned mine for a demo.

I teach a high school manufacturing and product development class and I wanted to demo scanning my students.

If people were interested I could scan more.

https://skfb.ly/pAOBV

I would be 100% interested.

 

[SillyPosition]

I just scanned mine for a demo.

I teach a high school manufacturing and product development class and I wanted to demo scanning my students.

If people were interested I could scan more.

https://skfb.ly/pAOBV

Yes!
Could be awesome if you could scan more. Especially the roof

what scanner is that and goes difficult it is to scan?

 

[scrutineer]

We can scan the roof. I will work on that in the next week or so.

The scanner is a Creaform MetraScan Black elite. Not hard to scan at all.

The files are not small tho.

 

[SillyPosition]

We can scan the roof. I will work on that in the next week or so.

The scanner is a Creaform MetraScan Black elite. Not hard to scan at all.

The files are not small tho.

A scan can be really nice.
I’ll happily pay something for your time and effort.

If you are willing to scan also some of the interior cargo area like the toolbars and the connecting rear roof bar, I think people will be able to create some very cool addons for the Bronco accurately

Sponsored