FORScan Bronco Working Spreadsheet (double honk, sport mode, chimes, seatbelts, and more!)

[BroncoDave24]

OK, Here is the 901st post to this thread...
When my fog lights are turned off at the headlight switch, they still want to operate in cornering mode. I have changed all of the settings mentioning "Fog Only" and I am still in cornering mode. I was curious if @Wyld2dr has noticed his doing this? When you turn them off do the stay off or do they go into cornering mode? No doubt, I am overlooking something.

Sponsored

 

[Wyld2dr]

EDIT: This one is a MUST, especially if you've done a Cat Back. Sport mode is no longer annoying AF.
__________________

I don't see this on the spreadsheet:

"That fake engine sound inside was one of the most annoying features of my Bronco. I was able to eliminate it with FORScan in the "As Built" ACM module under 727-01-01. The fix is xxxx-xxxx-0xxx. 1 is ESE on and 0 is ESE off. I can still barely hear the actual exhaust and that it what I want."

 

[mpeugeot]

Disabling auto start/stop only works on 21-22

Yet another reason to keep the 2021 Bronco.

 

[PayHeedKU]

I’m still struggling with getting the annoying alert to stop when the seatbelts are disconnected. As you can see from the picture I have the 3rd digit of the 2nd section of my IPC module set to a 0 but the alerts are still occurring.

Am I doing something wrong - does this look like the right set up to stop the chimes?

I’ve tried the non-Forescan method but I can’t follow the procedures since in the new digital display the seatbelt indicator never goes off.

 

[Highpockets]

I have not been able to turn the seatbelt minder chime off for the 2025 Bronco. The IPC module has changed from the 2023s. Anyone had success with this?

 

[PayHeedKU]

I haven’t been able to disable it in my 2025 either. Hoping someone has figured it out.

 

[B22-2023]

I haven’t been able to disable it in my 2025 either. Hoping someone has figured it out.

I can’t keep track of them all, and really don’t because I’m 2023, but auto stop start, this and a few others especially related to 2024/5 should go on a list of “202x”+ mods requested and send it out to Forscan. They are open to people requesting features, maybe they’ll put them in a future upgrade.

 

[mpeugeot]

I have not been able to turn the seatbelt minder chime off for the 2025 Bronco. The IPC module has changed from the 2023s. Anyone had success with this?

Have you tried the factory method without Forscan?

 

[B22-2023]

Have you tried the factory method without Forscan?

He did say he ” tried the non-Forescan method but I can’t follow the procedures since in the new digital display the seatbelt indicator never goes off.” Can’t tell if he tried the cheat code method

Disable Seat Belt Chime
1) Sit in the seat you want to disable the chime for. (you will have to do it individually for all seatbelts you want to disable)
2) Push the ignition button with the key in the truck and without pressing the brake pedal. (So the ignition is on without the truck running)
3) Wait for the seatbelt light to go out.
4) As soon as the seatbelt light goes out buckle and unbuckle the seatbelt 3 or 4 times until the seatbelt light comes back on.
5) Buckle and unbuckle the seatbelt one last time, the seatbelt light will flash a few times letting you know you did it right.

 

[Highpockets]

Have you tried the factory method without Forscan?

No, I wasn't aware of it. Will try what B22 posted. Thanks ya'll!

 

[Highpockets]

He did say he ” tried the non-Forescan method but I can’t follow the procedures since in the new digital display the seatbelt indicator never goes off.” Can’t tell if he tried the cheat code method

Disable Seat Belt Chime
1) Sit in the seat you want to disable the chime for. (you will have to do it individually for all seatbelts you want to disable)
2) Push the ignition button with the key in the truck and without pressing the brake pedal. (So the ignition is on without the truck running)
3) Wait for the seatbelt light to go out.
4) As soon as the seatbelt light goes out buckle and unbuckle the seatbelt 3 or 4 times until the seatbelt light comes back on.
5) Buckle and unbuckle the seatbelt one last time, the seatbelt light will flash a few times letting you know you did it right.

Will give it a try. As long as the chime stops I'll be happy.

 

[PayHeedKU]

Hopefully you can get it to work.

Didn’t work for me on the 2025 - the seatbelt warning light never went off.

 

[Highpockets]

No, I wasn't aware of it. Will try what B22 posted. Thanks ya'll!

Just tried the previous procedure and like PayheedKU, the seatbelt light never went out. Apparently the 25s will need something different.

 

[consultadrone]

OK, I did my searching of the forum and the greater Googlesphere and could not find the answer.

I am looking for the Forscan values/procedure to add the actual numerical values under the top 4 gauges on the dash. As I understand it, this is a Raptor only thing, but if anyone has the answer, I would be most grateful

 

[consultadrone]

It hasn’t been done.

It hasn't been done on a Raptor? I've seen references to it.

Sponsored