Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts.

[swooshdave]

I printed one for my Methods and it fell in as a nearly perfect fit, so I believe there are different sizes. It fit around the camera shaft perfectly.
I have Method 305s.

Yeah, the 300 series look to be different.

I haven't tried it yet as I have dust lights in the way but when I get a chance I will test it.

It looks like the right size and shape for my 703s.

@hey_mikey_ If this fit as I expect I'd love to have a STEP file so I can make custom Bronco centers.

Sponsored

 

[DaveInSA]

Sunglass holder from here:
https://makerworld.com/en/models/579300-bronco-sunglasses-holder?from=search#profileId-500057

Printed in ASA. Lined with some carpet that came with my Turn Offroad hardtop (wrapped around the front portion).

Stuck on with 3M VHB double sided tape.

 

[HammerNQuill]

Sunglass holder from here:
https://makerworld.com/en/models/579300-bronco-sunglasses-holder?from=search#profileId-500057

Printed in ASA. Lined with some carpet that came with my Turn Offroad hardtop (wrapped around the front portion).

Stuck on with 3M VHB double sided tape.

Super clean! That's similar to what I did with a Wera tool pouch (they come with velcro on the back that stuck perfectly in that same spot:


https://www.kctool.com/wera-136481-...mhYlBfJobODm_EU4eo4rPkKsQ9Q3JPhwaAoVwEALw_wcB

 

[mjp2]

A pretty niche thing but I made a subwoofer box port block as well as a cap for the area that gets trimmed to fit the Kicker 8" speaker.

It was part of my recent stereo upgrade. My first attempt at design and I figured I'd make it available for others tackling the same project.

https://www.bronco6g.com/forum/threads/mobridge-b-o-stereo-upgrade-installation-video.110747/

Posted to MakerWorld for anyone that wants it.

 

[DarthLincoln]

I have a dash rail with a 67 Design armature to mount my phone, but decided I prefer to have the phone mounted lower.
So I made a mount that attaches to the center console. Currently it displaces the small metal Ford Bronco built plate. I may move the triangular buttresses to the side so the plate can be attached on top.

Works for an iPad mini too, which just clears the auto trans shifter. Have to attach a magnetic phone ring holder to the back of the iPad mini.

 

[Jarrod_Watson]

Has anybody created or designed 3D print files for radio, climate control, and GOAT knobs. My daughter’s trying to turn her new Bronco pink so I am trying to print her some new knob covers for her birthday, but I don’t want to reinvent the wheel either.

thanks in advance.

 

[KABQ]

Has anybody created or designed 3D print files for radio, climate control, and GOAT knobs. My daughter’s trying to turn her new Bronco pink so I am trying to print her some new knob covers for her birthday, but I don’t want to reinvent the wheel either.

thanks in advance.

3D printed would definitely be cooler and look better, but several companies make vinyl inlays if no one has files for the knobs.

 

[Jarrod_Watson]

3D printed would definitely be cooler and look better, but several companies make vinyl inlays if no one has files for the knobs.

I know I’ve seen some 3D print d versions on Etsy, but none of them offer the color or style I am looking for.

 

[PowerBronco]

I know I’ve seen some 3D print d versions on Etsy, but none of them offer the color or style I am looking for.

I don't think this is what you are looking for, but just in case
https://cults3d.com/en/3d-model/gadget/bronco-goat-dial-cover-joshfisk3

 

[Jarrod_Watson]

I don't think this is what you are looking for, but just in case
https://cults3d.com/en/3d-model/gadget/bronco-goat-dial-cover-joshfisk3

This is what I have more in mind. She just wants something esthetically pleasing and functional. She’s not concerned with animals or kids playing with the buttons/knobs.

 

[KillerPenz]

This is what I have more in mind. She just wants something esthetically pleasing and functional. She’s not concerned with animals or kids playing with the buttons/knobs.

Seems you have (2) choices. Spend the $25 from Etsy (assuming they have in pink), OR do a couple of trial pieces until you dial it in. That's assuming you have the software to create the models. Based on these pictures it doesn't look too difficult, maybe some day I'll get around to giving it a shot just for the fun of it, but that's probably off in the future, not any time soon.

I am surprised that there aren't models of this available online as of yet, other than to purchase.

 

[Jarrod_Watson]

Seems you have (2) choices. Spend the $25 from Etsy (assuming they have in pink), OR do a couple of trial pieces until you dial it in. That's assuming you have the software to create the models. Based on these pictures it doesn't look too difficult, maybe some day I'll get around to giving it a shot just for the fun of it, but that's probably off in the future, not any time soon.

I am surprised that there aren't models of this available online as of yet, other than to purchase.

I thought the same thing. I figured any of the 3D print sites (Cults3D, MakerWorld, Thingiverse, or Printables) would definitely have something but mostly everything is just for scaled RC Broncos.

I am actually an architect by trade so I am using Rhino primarily. Some AutoCAD or Fusion. Don’t care for blender. Not as comfortable with it as with Rhino. Both have similar capabilities but I paid a lot for my Rhino license so I might as well use it.

The problem I’m having is trying to create mock ups and test them when she doesn’t know what I’m doing. The last time I tried my caliper measurements were slightly off and I had to go back to drawing board. The other thing is I hate to reinvent the wheel if all I have to do is modify it.

 

[KillerPenz]

I thought the same thing. I figured any of the 3D print sites (Cults3D, MakerWorld, Thingiverse, or Printables) would definitely have something but mostly everything is just for scaled RC Broncos.

I am actually an architect by trade so I am using Rhino primarily. Some AutoCAD or Fusion. Don’t care for blender. Not as comfortable with it as with Rhino. Both have similar capabilities but I paid a lot for my Rhino license so I might as well use it.

The problem I’m having is trying to create mock ups and test them when she doesn’t know what I’m doing. The last time I tried my caliper measurements were slightly off and I had to go back to drawing board. The other thing is I hate to reinvent the wheel if all I have to do is modify it.

I hear ya, I'm using AutoCAD for all of my models. I tried Fusion 360, but with my limited knowledge it takes 20 steps to do something I can do in about 3 in AutoCAD.

And yes, reinventing the wheel is a pain, but sometimes it's either that or purchase. Depends how much time you can devote to it. Good luck with whatever you choose.

 

[Jarrod_Watson]

I will definitely share what I come up with along with the STL so others don’t have the same problem in the future, if I get them to work.

 

[DaveInSA]

I will definitely share what I come up with along with the STL so others don’t have the same problem in the future, if I get them to work.

Have you seen these?

https://a.co/d/fJvAm2R

Sponsored