Anyone running 2 lights on the front bumper?

[Doc Rocket]

Swarfworks triple light mount, just using the outside two points. KC LED Slimlite Spot Beams with Daylighter classic covers. Wired to Aux #1. The lights in the bumper are a kit from 4x4TruckLEDs, with Diode Dynamics lights, wired to the 4-6 Aux Switches. The clear lights are driving pattern and wired together, so one switch turns on backlights, another driving lights, and a third the fogs.

As a note, for anyone thinking about the Swarfworks triple light mount: it fits great, no issues there, but you do have to remove the bumper to install it. This is kind of good, gives you a chance to work the wire harness, but you should be aware.

Used the KC Hilites harness, that was great, just chopped it off to use the factory aux switch leads.

Sponsored

 

[Toonces]

Swarfworks triple light mount, just using the outside two points. KC LED Slimlite Spot Beams with Daylighter classic covers. Wired to Aux #1. The lights in the bumper are a kit from 4x4TruckLEDs, with Diode Dynamics lights, wired to the 4-6 Aux Switches. The clear lights are driving pattern and wired together, so one switch turns on backlights, another driving lights, and a third the fogs.

As a note, for anyone thinking about the Swarfworks triple light mount: it fits great, no issues there, but you do have to remove the bumper to install it. This is kind of good, gives you a chance to work the wire harness, but you should be aware.

Used the KC Hilites harness, that was great, just chopped it off to use the factory aux switch leads.

Looks nice! I can't tell if you have a front camera - if so, how badly do these block it? I like the 3-light concept but am afraid it'll basically block the whole camera view (I have the same Ford brush guard and am almost resigned to putting a low-profile light bar in instead)

 

[B Miller]

I got a pair...

 

[rgwinn]

Just one on the bumper

 

[Doc Rocket]

Looks nice! I can't tell if you have a front camera - if so, how badly do these block it? I like the 3-light concept but am afraid it'll basically block the whole camera view (I have the same Ford brush guard and am almost resigned to putting a low-profile light bar in instead)

I have a Base Sasquatch, so I don't have the camera, and I don't know if it would block it for sure. However, I don't think it would, there is quite a gap between the lights.

 

[Toonces]

KC slimlites with rock guards, mounted with @Mountains2Metal bumper light brackets, tied into aux switch.

Hey bud - did those rock guards come with the KC Slimlites, or did you have to purchase them separately?

 

[Copperhorse73]

Hey bud - did those rock guards come with the KC Slimlites, or did you have to purchase them separately?

Separately. eBay has lots of options for them color-wise

 

[5280Bronco]

Finally got to my setup after an iteration or two trying to be as round as possible. TCB light mount and Nacho Quattros SAE fog/spot on the outside and Nach Grandes (4Lo) on the inside with the configurable settings. Love it.

https://www.texascompletebronco.com/products/modular-bumper-light-bar-bracket-2021-ford-bronco

 

[Apex_Chaser]

I run KC Pro6’s on my front bumper

This is the exact setup I am looking for and KC said it could not be done. How did you mount them on the bumper with bull bar?

 

[Mikerider]

Looks great! Any difference in performance white w amber covers vs amber lights?

marginal, the yellow is nice in the snow or dust, so thats when I pop the covers on. they live in the back most of the time though.

 

[kahunabob]

Not 2 like requested, but this kit is somewhat modular in the fact that you can choose 1-5 lights depending how you want to mount it. This is what we have.

I followed your link on the video. These are out of stock on Amazon. Any idea if they are coming back?

 

[CUPRA]

I followed your link on the video. These are out of stock on Amazon. Any idea if they are coming back?

I don’t know unfortunately. Let me ask the seller and find out.

 

[kahunabob]

I don’t know unfortunately. Let me ask the seller and find out.

Thanks!

 

[Eyentz86]

This is the exact setup I am looking for and KC said it could not be done. How did you mount them on the bumper with bull bar?

Check your PMs

 

[curtmcgirt]

KC slimlites with rock guards, mounted with @Mountains2Metal bumper light brackets, tied into aux switch.

No issues with the m2m brackets flexing/vibrating with the kc lights? These brackets or the spv brackets seem to be the only option when there's a winch in the middle of the bumper. But everything I see says either option is too thin and the lights wobble.

Sponsored