Ford bronco full width rear bumpers?

[JimmyZ]

I used search and got nothing. Looking for full width steel rear bumper for these Broncos. Seen a lot of stubby ones, but I want full width. Post pictures, and info If you bought one somewhere please. Amazon Prime has this one and I might buy and give it a try.
https://www.amazon.com/dp/B0DBXT693...p_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM

Sponsored

 

[Brian_B]

Oh man, what a rabbit hole

I don't have any specific recommendations, but a few places to check out:
Rough Country
BAMF
DV8
Turn Offroad
ARB
JCR
ADD
RTR
Hooke

I'm sure I'm forgetting a dozen more names - this is just off the top of my head

 

[Bikeric]

I used search and got nothing. Looking for full width steel rear bumper for these Broncos. Seen a lot of stubby ones, but I want full width. Post pictures, and info If you bought one somewhere please. Amazon Prime has this one and I might buy and give it a try.
https://www.amazon.com/dp/B0DBXT693...p_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM

That's the cheapest rear bumper I've ever seen for a Bronco. If that is what you consider "full width" than go for it. Most every other option will be 4X more expensive.

 

[Lifeliberty]

I've looked, nope. There were 2 that came close but had drawbacks.

There's one from Warn https://www.warn.com/elite-bumper-bronco

And one from China that mimicks the oem rear bumper but is all metal, never saw in person, was concerned about thickness
KUAFU Rear Bumper Compatible with 2021-2024 Ford Bronco Replacement for M2DZ-17K835-BA Black Steel Powder Coated Heavy Duty https://a.co/d/i8ZZN8F

 

[Brian_B]

I've looked, nope. There were 2 that came close but had drawbacks.

There's one from Warn https://www.warn.com/elite-bumper-bronco

And one from China that mimicks the oem rear bumper but is all metal, never saw in person, was concerned about thickness
KUAFU Rear Bumper Compatible with 2021-2024 Ford Bronco Replacement for M2DZ-17K835-BA Black Steel Powder Coated Heavy Duty https://a.co/d/i8ZZN8F

I have a Kuafu front bumper. It’s the same thickness as OEM - just didn’t have the same fasteners or powder coat

 

[IwannaGOfast]

Rockhard 4x4 makes one, with or without a tire carrier.

 

[NoloBronco]

Maxlider makes one. I am considering full width to be even with the fenders.

 

[Dadsquatch]

Here are a bunch I was considering for full width and goal to maintain OEM license plate location. I never ended up buying any of these, and just got an OEM steel take-off from someone else (which is still sitting on my garage floor).

- Addictive Desert Designs
- Bodyguard
- Barricade/Scorpion
- Lobo Offroad
- Rough Country
- Warn
- Maxlider
- Steelcraft Fortis
- RTR
- SVC
- Fab Fours

 

[campbebc]

I went 4WP because it doesn't have any weird branding on it and I wanted the rear light cutouts for night camping setup, etc. I bought directly from 4WP but lots of different vendors seem to carry it.

https://www.boss4x4.com/product-p/4wp2-61468w.htm

 

[Ninjak]

I run a Warn Elite Rear and Front. It is full length, has a good departure angle, great product.

 

[JimmyZ]

I went 4WP because it doesn't have any weird branding on it and I wanted the rear light cutouts for night camping setup, etc. I bought directly from 4WP but lots of different vendors seem to carry it.

https://www.boss4x4.com/product-p/4wp2-61468w.htm

How wide is it from side to side? Any pictures of it installed? Side picture, rear pictures?

 

[campbebc]

How wide is it from side to side? Any pictures of it installed? Side picture, rear pictures?

Crude measurement seems to be ~69" from edge to edge, measured across the top of the bumper. Mine is slightly tilted down since I installed it myself, loosening a couple of bolts with another set of hands should get it to sit just right. I added some matte black wrap to the paintwork that's in the gap between the bumper and body panels.

For reference, this is a non-sasquatch OBX with stock painted fenders, ~3" lift via Eibach coilovers, stock sasquatch wheels, 35" KO2 tires

 

[JimmyZ]

Crude measurement seems to be ~69" from edge to edge, measured across the top of the bumper. Mine is slightly tilted down since I installed it myself, loosening a couple of bolts with another set of hands should get it to sit just right. I added some matte black wrap to the paintwork that's in the gap between the bumper and body panels.

For reference, this is a non-sasquatch OBX with stock painted fenders, ~3" lift via Eibach coilovers, stock sasquatch wheels, 35" KO2 tires

Thanks for the info

Sponsored