Armadillo Designs Aluminum Hardtop

[Ninjak]

From what Fabian spoke on for batch 1 (My Batch) they are trying to start shipping near the end of the month. So he was saying around the week of 22nd or so. They want people to have it for the beginning of August.

Sponsored

 

[Chritaka]

I ordered my Square Back in black powder coat with sound deadening on Mon 7/8... Fabian has been super helpful throughout, with all the questions and purchase process. Now for the wait...

 

[Poppavein]

Central Texas gets crazy rain with high winds. I use to laugh when I stayed in Seattle (Burien summer) and San Fran and folks be like, it's raining so hard! Look out the window. Where? It's just a mist and wet ground. Yeah, it's really coming down! (This is a convo I had in both places.)

We called 'em gullywashers, which apparently is a southern thing.

https://www.southernthing.com/gullywasher-phrase-2661889743.html

Yeah, NYC gets more precipitation than we do. Rarely do we get heavy rain or thunderstorms. The clouds just dump what they have before going over the mountains to the eastern desert side.
Not sure if it matters regarding whether a roof leaks. Constant rain will find a way in, if it exists.
I bought a Jag in Phoenix. Found the rubber seals were shot after moving back to Seattle.

 

[Ninjak]

Oh its coming down the home stretch now. While on a podcast with Blanco Bronco, Bird Dog, And the Adventures of Henderson & Co, Fabion (AD) stated that several hardtops were heading to get powder coated. They are firing up the second station and they are rolling along. Storm did not hit them, but there were some complications with people coming in.

Today:

 

[Chritaka]

Updates on the SquareBack…production starts next week..!

 

[mcinfantry]

What’s the ones delivered look like, or will they design a third version before they deliver any?

 

[Chritaka]

Updates on the SquareBack…production starts next week..!

A few more from FB… SquareBack and SlantBack side by side…

 

[Chritaka]

What’s the ones delivered look like, or will they design a third version before they deliver any?

This is what they’ll look like. SlantBack is in production and SquareBack is going into production next week.

 

[Pseudoko]

What’s the ones delivered look like, or will they design a third version before they deliver any?

You can check out their instagram too where they constantly post fabrication updates. They post videos almost daily of fabrication . Nice to see videos of them building these tops

 

[Ninjak]

What’s the ones delivered look like, or will they design a third version before they deliver any?

If they stay on schedule, they should hopefully start shipping the slant back next week. In a statement from a video interview, (I think it was on dirt life) Fabion stated they were trying to get the slant backs out near the end of July. So fingers cross. He had also stated there were slant backs built and ready for powder. (Hoping mine was in that bunch!)

I am ready, I have everything in place. I hope that in August I will be enjoying my slant back here in the MIA.

 

[BroncoBill44]

If they stay on schedule, they should hopefully start shipping the slant back next week. In a statement from a video interview, (I think it was on dirt life) Fabion stated they were trying to get the slant backs out near the end of July. So fingers cross. He had also stated there were slant backs built and ready for powder. (Hoping mine was in that bunch!)

I am ready, I have everything in place. I hope that in August I will be enjoying my slant back here in the MIA.

Do share what you mean by “I have everything in place…”. I have one coming too and now I’m worried as I don’t know that I need things in place to prep?

 

[Ninjak]

Do share what you mean by “I have everything in place…”. I have one coming too and now I’m worried as I don’t know that I need things in place to prep?

Oh! Lol! You're good! What I meant was other things.

1. I bought Rockworkz screws to use for the hardtop.
2. I bought DV8 pocket rear molle panels for gullwing openings.
3. I am going to have my top panels done in a Forge Carbon Wrap to match my Forge Carbon hood and fender flares. My top will be white. Example of an overhead view is below.
4. I will use their external Molle on the gullwing to mount my Roto X. cans.

I have a space to put my Soft Top. Things like this.

 

[BroncoBill44]

Oh! Lol! You're good! What I meant was other things.

1. I bought Rockworkz screws to use for the hardtop.
2. I bought DV8 pocket rear molle panels for gullwing openings.
3. I am going to have my top panels done in a Forge Carbon Wrap to match my Forge Carbon hood and fender flares. My top will be white. Example of an overhead view is below.
4. I will use their external Molle on the gullwing to mount my Roto X. cans.

I have a space to put my Soft Top. Things like this.

Ohhhh ok. I too bought the Rockworz screws. They will work eh? I bought them way back when I financed the ADV debacle lol. Can’t wait for my top to arrive. I’m this first batch also.

 

[Ninjak]

Ohhhh ok. I too bought the Rockworz screws. They will work eh? I bought them way back when I financed the ADV debacle lol. Can’t wait for my top to arrive. I’m this first batch also.

Lol I am hoping they work! I bought them during that sale they just had. Orange to match my Badlands interior. Looing at pics of how the tops go on, there should be no issues.

 

[Chritaka]

Lol I am hoping they work! I bought them during that sale they just had. Orange to match my Badlands interior. Looing at pics of how the tops go on, there should be no issues.

Dangit, I need to look into those! Thanks for the reminder...

Sponsored