Anyone been in the BCM lately? Speed Turtle module compatibility

[Chrome_Pony]

Does our BCM look like this F150 BCM? Be nice to have a plug and play flasher setup.

Sponsored

 

[Chrome_Pony]

Hmm. Not that anyone other than me seems interested, but it would appear to be very similar.

@flip or @Ducati1098 are the Bronco BCM PNs shared with any other FoMoCo vehicles?

The fuse panel is DG9T-14B476-B/C/D/E which is shared across a wide range of vehicles and years, just wondering if the J3 plug is also shared. (Ignore the CHMSL J5 with the arrow, it was just a better picture than above)

 

[Ducati1098]

Hmm. Not that anyone other than me seems interested, but it would appear to be very similar.

@flip or @Ducati1098 are the Bronco BCM PNs shared with any other FoMoCo vehicles?

The fuse panel is DG9T-14B476-B/C/D/E which is shared across a wide range of vehicles and years, just wondering if the J3 plug is also shared. (Ignore the CHMSL J5 with the arrow, it was just a better picture than above)

They both have the same connector, but the pinout isn’t exactly the same. I have no idea if it would work

F-150:

Bronco:

 

[Chrome_Pony]

Thanks for the chime in.

That's bonkers. According to both pinouts, the device should not work at all

It's a flasher (emergency strobe) module, so parking/head/brake/turn signal lights should be all the circuits it affects.

According to that pinout, the Bronco would be in goblin poltergeist mode: locking/unlocking the doors, flashing the interior and ambient lighting, locking and unlocking the tailgate and flashing JUST THE LEFT rear reverse light.

Sponsored