What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[CitrusBronco]

Had fun! Juniper Dunes OHV area in Pasco, WA

Getting at it, nice.

Sponsored

 

[cynicalrider]

Finally saw what it was like to ride with both panels off (couldn’t do it with the factory roof rack) but since I needed to lift the top a smidge to get the M2M attic shelf installed it was a perfect opportunity. Also used it to install the iag cabin lights.

 

[Ellis Family Garage]

Went exploring with the Mrs.

 

[Richterman]

Installed some Molle and metal Bandland badges

 

[Reidt131]

Product must be flying out the door at Mountains2Metal. I too installed their attic shelf. It holds all my recover gear. I like it a lot.

I really want one of these, but I have an early 21' build without the rivnuts. The moment M2M releases their Rivnut template or guide I'm placing my order.

 

[Reidt131]

Wow, I like that attic shelf. My problem is having the 21, I do not have the holes, and I am wondering just how hard it would be to add them. It would be a great place to store the recovery ropes and such, and my jumper cables.

Another consideration, I will have my Slant back hardtop soon, so I wonder if the angle of that top will affect this shelf placement...

I know that at least one of Mountains2Metal's test broncos was a 21' where they retrofitted the rivnuts in. I am very curious how difficult that process was, because I'm in your same boat.

 

[jzweedyk]

Since the town is busy this weekend, we went where hardly anyone else goes. First to the Anticline which overlooks Hurrah Pass and the Chicken Corners trail, and then we went exploring. Found a point (on a legal trail) that had no tracks. We may have been the first people to visit the point this spring. It has a 270 degree view of the Canyonlands area and the Green River. A great place for lunch and a spectacular view.

 

[Reidt131]

KBD flares installed.

Looks like you were able to get the corners to line up better than mine.

I'm looking at taking mine off and replacing the tape with a stronger option. I think it is partially my fault for trying to install them when it was a little too cold, but some of my corners have peeled up.

 

[Reidt131]

ASFIR........installed the Transmission, T-Case, Crossmember, and Fuel Tank. Total weight is 52 lbs and great for me because of the MC/Salt brine they throw during the winter. Big plus was not having to strap up the tank to install the fuel tank skid plate and there is less than 1/4 inch between the tank and skid.

I've been looking for a lower weight "light to medium duty" skid setup for my Big Bend and this looks like it may be a perfect fit. Definitely like the idea of aluminum skids as I live in Michigan.

May I ask how much you have into the underbody protection?

 

[Reidt131]

Since the town is busy this weekend, we went where hardly anyone else goes. First to the Anticline which overlooks Hurrah Pass and the Chicken Corners trail, and then we went exploring. Found a point (on a legal trail) that had no tracks. We may have been the first people to visit the point this spring. It has a 270 degree view of the Canyonlands area and the Green River. A great place for lunch and a spectacular view.

Those photos are spectacular! I gotta get back out west one of these days, such unique scenery.

 

[Reidt131]

Did a wash and wax then installed my 4x4 Attitude sunshade! Got a quick drive in with the top off too

Love the Coul as a Ghoul sun shade! The black and white shade with just the pop of red looks sweet with the white bronc.

 

[mjp2]

I really want one of these, but I have an early 21' build without the rivnuts. The moment M2M releases their Rivnut template or guide I'm placing my order.

Have they said they have that in the works? I was planning on reaching out to them to request that very thing.

Rivnuts are easy as anything to install and I'd have this ordered in an instant if I knew where to drill the holes.

 

[Reidt131]

Have they said they have that in the works? I was planning on reaching out to them to request that very thing.

Rivnuts are easy as anything to install and I'd have this ordered in an instant if I knew where to drill the holes.

I haven't heard anything about it from them, but they have the install location info considering one of their test Broncs is an early 21' they added the mounts to.

Maybe I need to shoot them an email?

 

[Callelk]

I've been looking for a lower weight "light to medium duty" skid setup for my Big Bend and this looks like it may be a perfect fit. Definitely like the idea of aluminum skids as I live in Michigan.

May I ask how much you have into the underbody protection?

$1215.00 total, ordered on a Thursday and received the following Tuesday. Easy install and they are 1/4" thick.

These:
https://www.asfir.com/skid-plate-set-599655b-5.html

https://www.asfir.com/fuel-tank-skid-plate-599670.html

 

[Reidt131]

$1215.00 total, ordered on a Thursday and received the following Tuesday. Easy install and they are 1/4" thick.

These:
https://www.asfir.com/skid-plate-set-599655b-5.html

https://www.asfir.com/fuel-tank-skid-plate-599670.html

Thanks for the links! I was a bit overwhelmed with the Asfir website, too many odd shaped bits of metal lol.

Sponsored