Anyone running 2 lights on the front bumper?

[Johnny Rebel]

Baja LP6 Amber spots using included BD mounting bracket. Had to relieve part of the bracket so it wouldn’t rub the lower valence. Easy mod. Mounted with single bolt to top of the bumper and have had zero issues with movement or vibration.

Sponsored

 

[Portagebay]

How did you wire those up? Did you use the overhead aux switches? Is that orange, red, or code orange color?

Aux switch overhead. Not sure I understand the color question. The ARB lights have red accent.

How did you wire those up? Did you use the overhead aux switches? Is that orange, red, or code orange color?

 

[CUZICAN]

I agree round suits the bronco better, but I had a set of Rigid Q-Series laying around. I used the SPV brackets to mount them to the mod bumper.

 

[BK1]

I run with ARB Intensity. One flood, one spot. Plenty light without a lot of noise.

How did you wire those up? Did you use the overhead aux switches? Is that orange, red, or code orange color

Just two? I don't understand. Only two? Like... 1 + 1? Doesn't seem like enough to me.

Check out our site at www.4x4TruckLEDs.com for ideas/products

Thinking 2 larger lights on bumper without blocking camera. Have ditch lights already and adding light bar as well.

 

[BK1]

Aux switch overhead. Not sure I understand the color question. The ARB lights have red accent.

How many switches did you use? Are they still dimmable? Wasnt sure if accent was red or orange in picture

 

[BK1]

I agree round suits the bronco better, but I had a set of Rigid Q-Series laying around. I used the SPV brackets to mount them to the mod bumper.

I will probably order those brackets. Havent seen anything else yet i like. Hip to be sQuare

 

[Jtbob3]

I like the two light look as well. I went with KC's for the old school look. I am using DV8's Bull Bar. It did block the camera a bit, so I added new threaded inserts to move the lights 6" further apart. It still blocks the camera some, but not too bad. The inserts are available at Advance Auto. The kit from KC had a wiring harness, I used part of it to get it wired into the upfitter switches.

You can see one of the original inserts on the backside of the bull bar in the close up and in the close up on the screen.

I will be adding fog and driving lights in the bumper pockets soon.

 

[Portagebay]

How many switches did you use? Are they still dimmable? Wasnt sure if accent was red or orange in picture

One Aux switch for both lights. They are still dimmable via the ARB control. Color looks a bit orange red, but mainly red.

 

[BK1]

Just two? I don't understand. Only two? Like... 1 + 1? Doesn't seem like enough to me.

Check out our site at www.4x4TruckLEDs.com for ideas/products

You c

One Aux switch for both lights. They are still dimmable via the ARB control. Color looks a bit orange red, but mainly red.

Where did you put the arb control? Sorry for all the questions..

 

[LastDeadLast]

Black Diamond with the capable bumper and a retrofitted Rugged Ridge overrider bar for a Jeep.

I mounted a couple of old school Cibe 7" Oscar+ driving lights with 100w halogen bulbs. The light color doesn't match the headlights as much as I'd like, but it's insane light. I used the Aux switches with a relay mounted in the engine bay.

-Shannon

 

[Midnight_Blue]

I do not want to block camera view though.

Would be great to see photos of not just what the lights look like from the front of the Bronco but also what the lights look like in the camera view. Pretty sure lights on the bumper will always obstruct the camera view.

 

[KermitBronco]

"You can never have too much firepower" Billy Rose, Beverly Hills Cop II. Seconded by Heretic Studio and @KermitBronco.

We run these on 3 switches (#2, #3, #4). #1 is for white light bar above, #5 is for white ditch lights, #6 is for rear amber chase lights up high on Trailrax. Works like a charm on stock modular bumper.

 

[CUZICAN]

Would be great to see photos of not just what the lights look like from the front of the Bronco but also what the lights look like in the camera view. Pretty sure lights on the bumper will always obstruct the camera view.

Valid point, this is the view with the SPV brackets.

 

[Tricky Mike]

I will probably order those brackets. Havent seen anything else yet i like. Hip to be sQuare

Save yourself a few bucks.

 

[23BDBigSean]

2 is definitely not enough…

Sponsored