- Joined
- Mar 17, 2023
- Threads
- 14
- Messages
- 62
- Reaction score
- 94
- Location
- Bella Vista
- Vehicle(s)
- 2023 Badlands 4 door, 2.7 litre, cactus grey
- Your Bronco Model
- Badlands
- Thread starter
- #1
I connected Forscan to my 2023 Badlands 2.7 today. I wanted to turn off auto start-stop and change a setting on the DRLs. I was using the "easy method". After I had made and wrote those changes, I noticed that the little battery light was glowing on the dash. I disconnected Forscan and shut off and restarted the Bronco. The light stayed on.
I went back in and undid the change to the DRLs. I also cleared DTCs. The light stayed on. I had to drive into town so I did. No change to the light. When I got back home, I connected Forscan again and undid the auto start - stop change. Cleared the DTCs again. The light went out.
I watched several vids and read some threads but have not found anything that explains this. Was I doing something wrong? I noticed later under "Service Functions" that there was a selection "Battery Monitoring System Reset". Would running that have fixed this without reenabling auto start-stop? TIA
I went back in and undid the change to the DRLs. I also cleared DTCs. The light stayed on. I had to drive into town so I did. No change to the light. When I got back home, I connected Forscan again and undid the auto start - stop change. Cleared the DTCs again. The light went out.
I watched several vids and read some threads but have not found anything that explains this. Was I doing something wrong? I noticed later under "Service Functions" that there was a selection "Battery Monitoring System Reset". Would running that have fixed this without reenabling auto start-stop? TIA
Sponsored