Bronco Team 2 door.

[jflores]

I call them steps because they are not connected to the frame to be true sliders. Looks like it would not take much work to make them so they are though. Got them more to keep the "road debris" at bay and so the family has a step to get in.

Took it for a quick spin down by the river to the boat launch as the sun when down. On the way there are some railroad tracks I naturally slowed down for and then realized what I was in and got back in it. It takes railroad tracks very well, like they are not there. Oh, this thing is going to be some fun. !!!!!!

Would you mind sharing a link for your steps? My 2-door should be shipping soon and I like those steps better than any I’ve seen so far.

Sponsored

 

[BAUS67]

Would you mind sharing a link for your steps? My 2-door should be shipping soon and I like those steps better than any I’ve seen so far.

I do not mind at all. The look very similar to the Havoc ones, but they where not available at the time and I came across these.........

https://www.trailfx.com/trailfx/bro...-2DR-ROCKER-PROTECTION-STEP-BR012T--TLFBR012T

I will add one note if you get them......... when the instructions show you the passengers side bar with the arrow front it is wrong. I started to do it and the bar was about and inch away from the tire in the front and the rear didn't made it past the door. So I grabbed the Drivers side one and it matched much better and the step pad was in the right spot. Kinda like the tie rods, more of a "match 'em up and see what works best" approach.

 

[jflores]

I do not mind at all. The look very similar to the Havoc ones, but they where not available at the time and I came across these.........

https://www.trailfx.com/trailfx/bro...-2DR-ROCKER-PROTECTION-STEP-BR012T--TLFBR012T

I will add one note if you get them......... when the instructions show you the passengers side bar with the arrow front it is wrong. I started to do it and the bar was about and inch away from the tire in the front and the rear didn't made it past the door. So I grabbed the Drivers side one and it matched much better and the step pad was in the right spot. Kinda like the tie rods, more of a "match 'em up and see what works best" approach.

Thanks, Bud! I can’t wait to get mine. I think you were 1 build week ahead of me. Mine was built 3/15 but seems to be just sitting at MAP.

 

[BAUS67]

Thanks, Bud! I can’t wait to get mine. I think you were 1 build week ahead of me. Mine was built 3/15 but seems to be just sitting at MAP.

Yes I was Mar 6th build week. Was built on the 7th. First ship date was by April 7th. Then updated to Mar 16th. When that date came and went with no update, after a few days, I stopped by the dealer to see if they had an update. Your moving around they said, you are up to Mar 24th to the 30th just today so I would say any day now. Well I only had the 16th I replied. The next day it showed up at 4:30 on a hot shot truck.

Just keep checking. I used the status update on my Ford account. Your dealer gets updates as well you just need the right person to check. I still can't wipe the smile off my face. One badass ride.

 

[jflores]

Yes I was Mar 6th build week. Was built on the 7th. First ship date was by April 7th. Then updated to Mar 16th. When that date came and went with no update, after a few days, I stopped by the dealer to see if they had an update. Your moving around they said, you are up to Mar 24th to the 30th just today so I would say any day now. Well I only had the 16th I replied. The next day it showed up at 4:30 on a hot shot truck.

Just keep checking. I used the status update on my Ford account. Your dealer gets updates as well you just need the right person to check. I still can't wipe the smile off my face. One badass ride.

So cool! I’m stoked for you! I know you waited a lot longer than me. I reserved July 2021 so still a long time though. It won’t seem real until it’s in my garage. I am fortunate to have a dealer who is transparent and good at communicating, but I know his updates are only as good as what Ford is providing. My tracker has been stuck “in production” since 3/6 but my dealer did send me a screen-shot showing produced on 3/15. Maybe it's already on a train and they just haven't updated...

 

[mikej]

I'm curious if you found a half roof rack anywhere or if you custom made one

It‘s from JCR: https://www.jcroffroad.com/product/BR6RK-S.html

It finally arrives tomorrow (fun lead times over there!) and I hope to install it this weekend.

 

[petkyy]

It‘s from JCR: https://www.jcroffroad.com/product/BR6RK-S.html

It finally arrives tomorrow (fun lead times over there!) and I hope to install it this weekend.

Thanks for the link. Hope to see some pics when you're done. I might get the same

 

[lalnx]

Thanks, Bud! I can’t wait to get mine. I think you were 1 build week ahead of me. Mine was built 3/15 but seems to be just sitting at MAP.

I think these steps are virtually all the same.
https://www.extremeterrain.com/redr...sgs=23002&trk_link=HEN9F8MDD5DKJ3ROCV3TR5J5K4

https://www.amazon.com/gp/product/B0B1VGY7MQ?ref=ppx_pt2_dt_b_prod_image

https://havocoffroad.com/p/havoc-offroad-trailcrawler-steps/v/ford/bronco/2023/

 

[jflores]

I think these steps are virtually all the same.
https://www.extremeterrain.com/redr...sgs=23002&trk_link=HEN9F8MDD5DKJ3ROCV3TR5J5K4

https://www.amazon.com/gp/product/B0B1VGY7MQ?ref=ppx_pt2_dt_b_prod_image

https://havocoffroad.com/p/havoc-offroad-trailcrawler-steps/v/ford/bronco/2023/

Thank you!

 

[Jakethesnake]

That looks sick! Which KC lights did you get? Thats my next upgrade on the schedule.

look like Slimlites. Updated build has project x on the front bumper

 

[Fly by Nite]

I think these steps are virtually all the same.
https://www.extremeterrain.com/redr...sgs=23002&trk_link=HEN9F8MDD5DKJ3ROCV3TR5J5K4

https://www.amazon.com/gp/product/B0B1VGY7MQ?ref=ppx_pt2_dt_b_prod_image

https://havocoffroad.com/p/havoc-offroad-trailcrawler-steps/v/ford/bronco/2023/

The Havoc's are slightly different.... the outer tube wraps around the straight tube at the sill. The other two have a longer tube at the sill. Baus has the RedRocks?
Clambor's have a rougher texture. All are the 3 tube design, which I like.
I got the Havocs, weigh 26 lbs each. They're waiting for my Bronco to arrive!

 

[lalnx]

The Havoc's are slightly different.... the outer tube wraps around the straight tube at the sill. The other two have a longer tube at the sill. Baus has the RedRocks?
Clambor's have a rougher texture. All are the 3 tube design, which I like.
I got the Havocs, weigh 26 lbs each. They're waiting for my Bronco to arrive!

Actually as you really take a detailed look at them, maybe the Red Rock, and TrailFX might be the same, they apear to have similar mounting as well. The Havoc tube arrangement is different as you pointed out, and I like that. I like how the mounting of the clambers mount to the back of the rockers as the others do, but they also clamp through the pinch weld as well. They may actually work as sliders. My Clambers should show up today, and my Bronco should be here in about 3 weeks.

 

[Fly by Nite]

^^^ Redrock I think.
The Havocs have the mounts attached, they bolt on to the factory slider locations. The others appear to have separate brackets.
I ordered the Havocs back in Sept. They are finally back in stock on their webpage, $382.
Either of these are a great value! Others I was considering are $800+

 

[Jakethesnake]

^^^ Redrock I think.
The Havocs have the mounts attached, they bolt on to the factory slider locations. The others appear to have separate brackets.
I ordered the Havocs back in Sept. They are finally back in stock on their webpage, $382.
Either of these are a great value! Others I was considering are $800+

I got the Havoc barricades and put them on this past weekend. Love how they hide the pinch weld and are super sleek. Not sure why they have the cutout in the middle but I’m getting used to it. The instal was super easy as well

 

[jflores]

Thanks for all the info and pictures, guys. My bronco will have rock rails already installed and I’m a tall girl so I don’t think I’ll have trouble getting in out but I’m hoping the steps will help to deflect some of the road debris without me having to run mud flaps full-time.

Sponsored