NEW PRODUCT | Diode Dynamics HitchMount LED Pod Reverse Kit

[TexasForever]

Was anyone able to confirm whether or not this is able to fit the bronco hitch or if the housing is too small? Wanting to purchase but not before I make sure it'll actually be able to have a clean install

Sponsored

 

[Lak34ers]

Works on the Broncos according to Diode… we are closed till Tuesday when I’ll do some photos in the shop

Did you get this to work? I'm running into the same issues as the video. Too tight of a space because the metal back plate is so close. If you got it to work please post pics.

 

[4x4TruckLEDs.com]

Did you get this to work? I'm running into the same issues as the video. Too tight of a space because the metal back plate is so close. If you got it to work please post pics.

Someone just posted this photo. Seems to work just fine...

 

[Strykerwsu]

Someone just posted this photo. Seems to work just fine...

Yes mine worked out the same way. Zip tied to be safe but can’t see harness from behind vehicle. Just undo 10 mm bolt and makes easy. Unfortunately I had one of the first ones with resistor but now cut and will test tomorrow but in first startups, tow / blis issue didn’t light up.

Super bright, great for price.

 

[Lak34ers]

Yes mine worked out the same way. Zip tied to be safe but can’t see harness from behind vehicle. Just undo 10 mm bolt and makes easy. Unfortunately I had one of the first ones with resistor but now cut and will test tomorrow but in first startups, tow / blis issue didn’t light up.

Super bright, great for price.

Did it and worked great. Definitely need to remove bolt to get better access. Got a longer zip tie.

 

[derichio02]

Doesn't work the best for the Bronco Raptor. The Exhaust actually exits very close to the location where it pokes out. Gave mine to my brother in law for his RAM. I may have to think of some shielding and try again... @4x4TruckLEDs.com do you have any more C1R's in stock?

 

[4x4TruckLEDs.com]

Yes we have them in stock

 

[derichio02]

Yes we have them in stock

Cool, just purchased with some 2' SSC2 pod covers. Is the C1R the updated model or are there any modifications needed?

 

[4x4TruckLEDs.com]

Cool, just purchased with some 2' SSC2 pod covers. Is the C1R the updated model or are there any modifications needed?

There's only 1 C1R on the market right now, the one we have.

 

[derichio02]

There's only 1 C1R on the market right now, the one we have.

yeah I was referring to the need to snip some wires that was present on some early units.

 

[4x4TruckLEDs.com]

yeah I was referring to the need to snip some wires that was present on some early units.

The only ones we ship are already fixed. This is why customers buy from us, we take the extra steps to ensure they are working when we ship them

 

[joeb]

Looking for others who have installed this.

Pics and feedback please.

Thanks

 

[El Bronco Loco]

I received it earlier in the week and fought over a few days to get the wiring to fit. Finally got it today, but I don’t love the way I had to leave some of it hanging out instead of nicely tucked out of sight. I’ll revisit it at some point. I’m very happy with the light and function.

 

[Strykerwsu]

I received it earlier in the week and fought over a few days to get the wiring to fit. Finally got it today, but I don’t love the way I had to leave some of it hanging out instead of nicely tucked out of sight. I’ll revisit it at some point. I’m very happy with the light and function.

No one can see it. Enjoy the extra light

 

[joeb]

I received it earlier in the week and fought over a few days to get the wiring to fit. Finally got it today, but I don’t love the way I had to leave some of it hanging out instead of nicely tucked out of sight. I’ll revisit it at some point. I’m very happy with the light and function.

Thank you
That looks like a Clean install from your pics.

Enjoy

Sponsored