Not getting sound to subwoofer from amp, help?

[broncoToBe]

I have a Stinger subwoofer box and an Audiocontrol LC-5 1.300 with the harness, bought from plugnplaykits. I've hooked up everything, getting sound from all the speakers, but the sub is not turning on. Can anyone look if I have something hooked up incorrectly, or steps to figure out what's wrong?

Sponsored

 

[derichio02]

Looks like you may need to adjust you Accubass Threshold. I cant tell if it is enabled or disabled from the pic but the Accubass gain appears that it is all the way down.

 

[derichio02]

Also ensure that the 3/4-5/6 is Sum and not separated as you dont have a separate sub input so you need to sum from the other channels. I would play with this switch as well

 

[broncoToBe]

Also ensure that the 3/4-5/6 is Sum and not separated as you dont have a separate sub input so you need to sum from the other channels. I would play with this switch as well

That made it turn on!
Thank you!

 

[derichio02]

Glad it worked out! Do you have the B&O system or the 6 speaker system? I have been thinking of buying the plug an play git fro the B&O but havent seen any reviews or where it hooks up.

 

[broncoToBe]

Glad it worked out! Do you have the B&O system or the 6 speaker system? I have been thinking of buying the plug an play git fro the B&O but havent seen any reviews or where it hooks up.

6 speaker system

 

[Silence]

Let me know your thoughts on the sub once you get everything dialed.

Sponsored