Show us your installed wheel / tire upgrades here! (Pics)

[adrencg]

Wheels look great. Also loving the RC Tube steps. I have the same ones sitting in my garage waiting- were they easy to install?

Super easy. Took about 20 minutes.

Sponsored

 

[straycat]

SCS Ray10s in Matte Gunmetal / 17x8.5 -10mm 6x139.7) with 35/12.50R17 Toyo Open Country A/T III, and a front end 1" level.

 

[Interior guy]

We just installed the Fuel Block D750 in 17'x9" with Nitto Ridge Grapplers 35x12.50R17 on our Black Wildtrak that just arrived. The car was completely ceramic coated by Protective Film Solutions and photographed by Ted7.

What is your offset?

 

[Hellion10]

Fifteen52 Range HD Magnesium Gray Zero Offset, Nitto Ridge Grappler 315/70/17

 

[MnLakeBum]

SCS Ray10s in Matte Gunmetal / 17x8.5 -10mm 6x139.7) with 35/12.50R17 Toyo Open Country A/T III, and a front end 1" level.

It looks amazing! Which 1" leveling kit did you use and did you install it yourself? If not, how much did they charge for the install labor?

 

[straycat]

It looks amazing! Which 1" leveling kit did you use and did you install it yourself? If not, how much did they charge for the install labor?

Thank you! @JCAntimatter was definitely my inspiration, so I can't take full credit in wheel choice.

The guys at @chris@pandamotorworks got me the Zone Offroad 1" level kit and a couple hours in labor including the install/mount/alignment. Overall very happy with everything so far.

 

[Aviboy97]

Powder coated my Sasquatch wheels.

That’s definitely unique. I like it.

What mud flaps did you use?

 

[AKBronc49]

That’s definitely unique. I like it.

What mud flaps did you use?

Thanks, I like things a little different.

The flaps are just cheap universal flat flaps, I trimmed them a little bit and mounted to the flare, running board and fender liner. They have been on since day 2 and 2700 miles later working great.

 

[JCAntimatter]

SCS Ray10s in Matte Gunmetal / 17x8.5 -10mm 6x139.7) with 35/12.50R17 Toyo Open Country A/T III, and a front end 1" level.

DAMN! I thought I was looking in the mirror for a minute!!l LOL Nice!

 

[Jhuff]

SCS Ray10s in Matte Gunmetal / 17x8.5 -10mm 6x139.7) with 35/12.50R17 Toyo Open Country A/T III, and a front end 1" level.

Now I'm confused. How do these have no poke at -10? Anyone? Don't get me wrong, this is a good thing, I like these wheels!

From what I've seen, 0 offset is usually too much for my tastes, even with squatch flares.

Edit: Is it because this is a non-squatch? I am having trouble remembering all the different numbers for different combinations.

 

[zuke]

Now I'm confused. How do these have no poke at -10? Anyone? Don't get me wrong, this is a good thing, I like these wheels!

From what I've seen, 0 offset is usually too much for my tastes, even with squatch flares.

Edit: Is it because this is a non-squatch? I am having trouble remembering all the different numbers for different combinations.

Not sure, but maybe because they're only an 8.5" wide wheel? They'd only have 4 1/2 Inches of rim to the outside of the rotor, versus say a ProComp Series 69, 9" at -6, So about 4 3/4 inches...

Along with a Toyo A/T III, which has about an 10" tread width, This is problably one of the least 'pokey' 35" setups you could build. that's why threads like this are so useful, It's almost impossible to say how a certain setup is going to look/work until someone actually tries it

 

[Kekov721]

 

[straycat]

DAMN! I thought I was looking in the mirror for a minute!!l LOL Nice!

Your Bronco was definitely my inspiration the moment I saw it. Luckily we're far enough away from each other we wont awkwardly run into each other wearing the same thing!

 

[Area 51 Manley]

That backdrop though…

Lift?

Sponsored