🛠 1/3/22 Build Week Group

[Tarheel_Wes]

I have used Dynamat and it works very well. I don't think the problem is with sound penetration. it is wind getting in between the panel edges in the middle section for me. Probably all sections.

The big issue with Dynamat or FatMat, its cheaper cousin, is it smells like Tar for months.

My plan is to see if beefing up the rubber weather stripping with some surgical tubing will help.
I just got to find the time to do it.

Cool....i'll be anticipating your results!

Sponsored

 

[Alvin Olson]

Here is my current list of projects yet to be done.

• Front License Plate Installation
  • Return the AR Call Sign since it doesn’t work with the Bull Bar
  • Ordered the BuiltRite version and will use it.
• Mud Flaps
  • Install or test install the GatorBack Mud Flaps from Ford.
• StickerFab Installs
  • Dash Passenger Overlay install
  • Door Sills install
  • Screen Protector install
• RPG Leveling Kit
  • This will be done by a shop.
• Baja Design Pod Lights for the Hood Mounts
  • Ordered
• Baja Design Light Bar for the Roof
  • Ordered
• MIC Noise Reduction project
  • Determine location of wind noise
  • Use Surgical Tubing inside the weatherproofing, if possible, to bolster the fit.

 

[MConn]

Train stalking update, it departed Conway, PA yesterday afternoon. That is only a little over 5 hours from my dealership! Just maybe it will be here before 3/2?!

Do know when you shipped from MAP?

 

[Cszmom]

Do know when you shipped from MAP?

I honestly don’t know since a shipped date never populated. My guess is maybe Saturday or Sunday. The rail yard they have for me is super close to the dealership, and it seems, based on my United stalking, they pick up pretty much every two days.

 

[Duke.Roughneck]

Here is my current list of projects yet to be done.

• Front License Plate Installation
  • Return the AR Call Sign since it doesn’t work with the Bull Bar
  • Ordered the BuiltRite version and will use it.
• Mud Flaps
  • Install or test install the GatorBack Mud Flaps from Ford.
• StickerFab Installs
  • Dash Passenger Overlay install
  • Door Sills install
  • Screen Protector install
• RPG Leveling Kit
  • This will be done by a shop.
• Baja Design Pod Lights for the Hood Mounts
  • Ordered
• Baja Design Light Bar for the Roof
  • Ordered
• MIC Noise Reduction project
  • Determine location of wind noise
  • Use Surgical Tubing inside the weatherproofing, if possible, to bolster the fit.

Make sure you keep posting you updates here! I'm curious about the flaps since it seems like there's no good solution for squatch...

 

[Jazer]

I’ve got a solid 50 pages to catch up on but after 23 days I GOT MY BRONCO BACK TODAY!!!!!!!!!!!

I can’t believe it’s been 3 weeks. Im so glad you have it back now though!

 

[daddycreswell]

Here is my current list of projects yet to be done.

• Front License Plate Installation
  • Return the AR Call Sign since it doesn’t work with the Bull Bar
  • Ordered the BuiltRite version and will use it.
• Mud Flaps
  • Install or test install the GatorBack Mud Flaps from Ford.
• StickerFab Installs
  • Dash Passenger Overlay install
  • Door Sills install
  • Screen Protector install
• RPG Leveling Kit
  • This will be done by a shop.
• Baja Design Pod Lights for the Hood Mounts
  • Ordered
• Baja Design Light Bar for the Roof
  • Ordered
• MIC Noise Reduction project
  • Determine location of wind noise
  • Use Surgical Tubing inside the weatherproofing, if possible, to bolster the fit.

Alvin I have some door sill in the works that I think will knock peoples socks off. Waterproof, slip resistant and customizable. Just got to get with a buddy of mine to do it....if only I didn't have a day job!

 

[Alvin Olson]

Alvin I have some door sill in the works that I think will knock peoples socks off. Waterproof, slip restiant and customizable. Just got to get with a buddy of mine to do it....if only I didn't have a day job!

ya. My daughters have offered to make all of these decals for us, but seem to never have the time. Cobblers children or parents go without.

 

[daddycreswell]

ya. My daughters have offered to make all of these decals for us, but seem to never have the time. Cobblers children or parents go without.

Ha, these aren't decals.

 

[Cszmom]

Alvin I have some door sill in the works that I think will knock peoples socks off. Waterproof, slip restiant and customizable. Just got to get with a buddy of mine to do it....if only I didn't have a day job!

These are what I am holding out for. I was going to order from stickerfab but I knew you were working in something.

 

[Eleon196]

Ok, I think I finally figured the tail tracking out. I was just being lazy and needed to actually follow the directions. Very cool to see that you can track your shipment. Thank you for sharing this information. My Bronco is currently in Tennessee, slowly making its way to Tampa!!!!

 

[daddycreswell]

These are what I am holding out for. I was going to order from stickerfab but I knew you were working in something.

Thanks, I've been down 3 or 4 different avenues over the last couple of weeks. Yea I could do a decal but I wanted to offer something that I would use on my own Bronco. I think I found it yesterday when I visited a buddy who does some custom work on other stuff. It just kind of clicked and I said why not. I showed the wife and she liked it. I hope to have a set done this week or early next week, then I can show it off. I am actually excited about the idea!

 

[Ford Motor Company]

I’ve got a solid 50 pages to catch up on but after 23 days I GOT MY BRONCO BACK TODAY!!!!!!!!!!!

Yay!! Now take it for a ride.

 

[MConn]

I honestly don’t know since a shipped date never populated. My guess is maybe Saturday or Sunday. The rail yard they have for me is super close to the dealership, and it seems, based on my United stalking, they pick up pretty much every two days.

good to know! Since mine wasn't taken off at Conway (TWICE!) I haven't gotten any info about reshipping and was trying to see if we may be on the same rail - but it seems unlikely.

It sounds like you'll get it sooner to me too though!

 

[Cat]

Me too. I'm big on "sound"....been reading that "do-it-yourself" sound deadening thread where the guy used the dynamat......i wanna do it, but have never worked with it at all, kinda scared to screw up my top.

I thought felt was the best sound deadening material? Lighter, comes in different colors, doesnt stink. And, you can still stick patches to it!

Sponsored