🛠 1/3/22 Build Week Group

[CRBronco]

Monday morning update….still no update! Still stuck in production, still EDD of 2/10 which is impossible since it can’t get to DE in 3 days

Same boat here. 1/11 production date, but a blend date of 1/8. Not sure how that makes sense. Delivery is estimated at 2/14 but I am not holding my breath.

Sponsored

 

[daddycreswell]

I didn't think either side did it at first but I was able to get them both to do it. I pull the lever by the shoulder to fold the seat forward then I use my hand on the back of the seat to give a better push while holding some tension on the shoulder lever.

I found it was difficult just using one hand on the shoulder lever. I think the seats need to break in a bit, it's gotten easier the last few days. The seat back needs to tilt forward enough to release the slid latch, if that makes sense.

I was pi**ed at first thinking they didn't operate like every other 2 door seat in the universe. I actually told my wife how stupid the seats were but then I messed around a bit more and got them to work.

They go right back to the pre-set position as well. I just push the seat bottom back first then the seat back, works like a camp.

Give it a shot!

Maybe you are correct, I'll look at it when I get home today.

 

[daddycreswell]

Well campers it's a sad day for me. For the 1st time since Jan 19 I didn't get to drive the Bronco to work. I left it in the driveway, it looked sad as I drove off. It's the wife's (who works from home) ride, I had been driving it because my son was driving my Raptor because his F250 had been in the shop since after Christmas. He finally got it back, so I got my truck back. I did miss my truck though, felt good to get back in the seat of it.

 

[Schmohawk]

Mine has been sitting there in production since 1/6, I'm in South Florida so mine is shipping rail

Monday morning update….still no update! Still stuck in production, still EDD of 2/10 which is impossible since it can’t get to DE in 3 days

very similar here… 01/06 production date… 02/12 projected delivery… nothing changed over the weekend. I’m in Pennsylvania… about 4.5 hours from MAP… I’m kinda holding my breath… but squeaking air in from time to time

here’s hoping my friend!!! Blessings!!!

We're all in the same purgatory boat I feel.... I have a 1/6 production with an EDD that updated to 2/10 on friday.... I live in western NY, about 4 hrs if you go through Canada

Same boat here. 1/11 production date, but a blend date of 1/8. Not sure how that makes sense. Delivery is estimated at 2/14 but I am not holding my breath.

I saw in another thread that if you are in production, the estimated delivery date is actually the date that it is expected to be built/ shipped, not the date it will be delivered. Once the Bronco is shipped, the date will change. My EDD is 2/10 but with MAP closed I don't expect it to ship by then.

 

[Jazer]

Well campers it's a sad day for me. For the 1st time since Jan 19 I didn't get to drive the Bronco to work. I left it in the driveway, it looked sad as I drove off. It's the wife's (who works from home) ride, I had been driving it because my son was driving my Raptor because his F250 had been in the shop since after Christmas. He finally got it back, so I got my truck back. I did miss my truck though, felt good to get back in the seat of it.

My husband has yet to drive the Bronco, lol!

 

[Alvin Olson]

Well campers it's a sad day for me. For the 1st time since Jan 19 I didn't get to drive the Bronco to work. I left it in the driveway, it looked sad as I drove off. It's the wife's (who works from home) ride, I had been driving it because my son was driving my Raptor because his F250 had been in the shop since after Christmas. He finally got it back, so I got my truck back. I did miss my truck though, felt good to get back in the seat of it.

I watched the wife drive off to work in it this morning after spending the weekend with mod projects. insert sad face

 

[Allegedly]

1/6 blend. Dealer site just updated with stock images, edd changed from 2/8 to 2/11, and palsapp finally updated with origin (train yard about an hour from dealer) and destination. Any day now.

 

[daddycreswell]

I watched the wife drive off to work in it this morning after spending the weekend with mod projects. insert sad face

They just don't get it Alvin.... mine couldn't figure out why I was trying to clean the garage out to get it inside. She said "you never cared before", I said well they weren't Broncos either.

 

[Alvin Olson]

They just don't get it Alvin.... mine couldn't figure out why I was trying to clean the garage out to get it inside. She said "you never cared before", I said well they weren't Broncos either.

Josh, I sit and stare at my Vehicles and have adventures in my mind.
She says, yup.. its clean. I am driving it to the mall now. :-(
Please Park far far away..

 

[Alvin Olson]

1/6 blend. Dealer site just updated with stock images, edd changed from 2/8 to 2/11, and palsapp finally updated with origin (train yard about an hour from dealer) and destination. Any day now.

So exciting,, hopefully the rail yard is efficient at clearing the vehicles for transport.

 

[Cszmom]

I saw in another thread that if you are in production, the estimated delivery date is actually the date that it is expected to be built/ shipped, not the date it will be delivered. Once the Bronco is shipped, the date will change. My EDD is 2/10 but with MAP closed I don't expect it to ship by then.

That is what I was beginning to think but my dealer and customer service both told me a few weeks ago that my Bronco was already through QC and just waiting to be released. So zero clue why it is just sitting there when my dealer has received a Bronco built at the same time.

 

[Schmohawk]

I saw in another thread that if you are in production, the estimated delivery date is actually the date that it is expected to be built/ shipped, not the date it will be delivered. Once the Bronco is shipped, the date will change. My EDD is 2/10 but with MAP closed I don't expect it to ship by then.

Found the post I refernced earlier, my wording was a bit off:

https://www.bronco6g.com/forum/threads/ice-mountain-photos-after-snow-storm.35677/post-1187886

Good luck this week to all those in production!

 

[Schmohawk]

That is what I was beginning to think but my dealer and customer service both told me a few weeks ago that my Bronco was already through QC and just waiting to be released. So zero clue why it is just sitting there when my dealer has received a Bronco built at the same time.

Same here, I was told by Ford CS and my dealer that mine had been produced and would ship between 1/24 and 1/31 but that didn't happen.

I'm thinking they forgot which lot they parked ours at lol.

 

[nfearno34]

1/6 blend. Dealer site just updated with stock images, edd changed from 2/8 to 2/11, and palsapp finally updated with origin (train yard about an hour from dealer) and destination. Any day now.

That is fantastic!!!! Woohoo! There Is hope
For the rest of us!

 

[nfearno34]

Still sitting in production Happy First Monday of the week!

Sponsored