Sponsored
- First Name
- Dick
- Joined
- Apr 12, 2021
- Threads
- 88
- Messages
- 7,499
- Reaction score
- 25,646
- Location
- PNW
- Website
- www.TD-Distributing.com
- Vehicle(s)
- 21 Bronco, 88 Bronco II, 03 Ford F250
- Your Bronco Model
- Badlands
I keep checking with Compustar and the like but still no solutions. If this guy gets it working he'll be a legend.
- First Name
- James
- Joined
- Sep 29, 2020
- Threads
- 1
- Messages
- 64
- Reaction score
- 169
- Location
- Excelsior, MN
- Vehicle(s)
- 1965 impala
- Your Bronco Model
- Badlands
I have been watching for any remote start developments as well!
Worst case scenario, I was going to see if there is a "neutral" switch in the transmission or somehow set one up. That way it reduces the risk as it will only turn on or start when in "neutral".
If there is an off the shelf version, totally in!.
Worst case scenario, I was going to see if there is a "neutral" switch in the transmission or somehow set one up. That way it reduces the risk as it will only turn on or start when in "neutral".
If there is an off the shelf version, totally in!.
I've got a spare 933 fob and transceiver sitting here waiting to install. I haven't torn into it yet to see where exactly it goes. I ordered it just for the off chance it would work.
Not having remote start when you have no less than 2 safeties available to ensure its not in gear and the brake is set just seems ridiculous to me.
Not having remote start when you have no less than 2 safeties available to ensure its not in gear and the brake is set just seems ridiculous to me.
Last edited:
Sponsored
- Thread starter
- #6
I ordered an RTM from Ford parts for the 902 mhz version. Also ordered the remote start Bronco key fob from the same parts.ford.com website. Cost a total of $105. The RTM is located on the roll bar cross member behind the overhead lamp. I programmed the remote first and then replaced the RTM. Programmed in forscan with the as built data and it worked as a key fob. Remote start is still a work in progress.
I watched the video, I wonder if it would make any difference having the clutch depressed. Just a shot in the dark but may help eliminate potential issues.
- First Name
- Butzy
- Joined
- Jan 23, 2021
- Threads
- 26
- Messages
- 1,281
- Reaction score
- 2,327
- Location
- Brookfield, Ohio
- Vehicle(s)
- f150 & bronco
- Your Bronco Model
- Base
Wow! I got roasted for suggesting this a few months back.....
Sponsored
- First Name
- Bradley
- Joined
- Feb 18, 2020
- Threads
- 36
- Messages
- 661
- Reaction score
- 589
- Location
- CA Central Coast
- Vehicle(s)
- 2023 Bronco, 2024 HD Street Glide & 2019 Yamaha XSR900
- Your Bronco Model
- Outer Banks
Funny how quickly the winds change 
- Thread starter
- #13
No. Pressing the clutch did not make this work. It is a combination of having the telematics control module for a automatic plus a bunch of little work around to get it to work. This is dangerous so a working solution will not be published. For those wanting to experiment with the settings, drop me a pm.
I Installed Ford's perimeter plus module in my 2022 manual transmission Badlands. The installation instructions have references to manual start capabilities that I haven't looked into further. Maybe remote start with a new key fob and some forscan changes?? I don't think Fordpass phone app would add the remote start "button" since the app is probably linked to as built VIN#.
After you changed the RTM, how did you add the new key fobs(s)?
Did you have to reconfigure/reset TPMS modules?
Sponsored
