WildTrak 2DR Money Pit

[Caldoh]

2 door for the win. looking good

Sponsored

 

[nabronco21]

Money Pit - LOL.

Just as you think there's not ONE more thing you need, someone posts something like this:

They just 'finish the look'.

I recommend not purchasing these caps as they will essentially weld themselves to the valve stem and you will not be able to remove them. Maybe anti seize will work but not too sure.

 

[emkayw]

I recommend not purchasing these caps as they will essentially weld themselves to the valve stem and you will not be able to remove them. Maybe anti seize will work but not too sure.

I have these and similar long-stemmed ones. Funny thing is, the long stemmed ones faded to the point that they nearly match my bronze wheels. Never had a problem removing either set from the valve stems, even in direct SoCal summer sun.

 

[Krokodokolo]

I havent even bought one yet and the fact that they are such money pits is one of the reasons I want one.

 

[nabronco21]

I have these and similar long-stemmed ones. Funny thing is, the long stemmed ones faded to the point that they nearly match my bronze wheels. Never had a problem removing either set from the valve stems, even in direct SoCal summer sun.

Mine did fade to bronze as well. Perhaps it was the salt on the roads in my area that caused the issue.

 

[GroovyGeek]

You are either married to an angel or to an indifferent monster who doesn't give a damn. Or, more likely, she spends more on shoes than you do on the WT so she minda her own business so as not to rock the boat.

 

[desibull]

I am so jealous of your lack of self-control!!! Your rig looks amazing! At least we share the same color!

Have you seen a marked difference with the intercooler install? I have been reading about intercoolers but because it is a big ticket item (both the part and the install) just want more input.

Well done with your rig!!

 

[Captkrunch]

Hahah, you’re welcome

Badass rig love it!!!

I would also love to see what you did with the CVF cat back to gain more ground clearance.

Well....

I first attempted to utilize a metalClock exhuast guard and modify that.... Didnt work, and i gave up! so i cut it off at the AXLE

So im still trying to figure it out....

 

[Captkrunch]

Nice ! I bet she runs like a scalded dog!.

She is a bit faster! haha

 

[Captkrunch]

You are either married to an angel or to an indifferent monster who doesn't give a damn. Or, more likely, she spends more on shoes than you do on the WT so she minda her own business so as not to rock the boat.

Haha she is more distracted with the amount i spend on Airplanes!

 

[Captkrunch]

I am so jealous of your lack of self-control!!! Your rig looks amazing! At least we share the same color!

Have you seen a marked difference with the intercooler install? I have been reading about intercoolers but because it is a big ticket item (both the part and the install) just want more input.

Well done with your rig!!

A Major difference in Cooling with the H/C Pipes, and intercooler.... About 20 degrees from what i observed with my procal device! @MWLD has a very informative video if you want to check that out!

 

[Captkrunch]

Update: Checked the stock CV Axles to see some leaking, ford wont cover it due to modifications (haha) decided to just pull them out...

and upgrade to RCV axles

 

[Gtrekker]

Nice build, and a Top Tier color... For the Win!!!

Team 2 Door = Purpose Built and Bad Ass!!!

 

[Captkrunch]

Getten it done!

 

[Captkrunch]

Finished the install and took it out for a test spin, nothing broke! So we are good to go!

Sponsored