What bolt for Bestop?

[Lèòn]

Hows it going?

Quick question, one of the joints is missing a bolt on my soft top and I wanna replace it, bit I cant make out what size it is on my bestop soft top

Ill get what I need soon, just need to figure out what size I need to replace it

thanks in advance

Mike

Sponsored

 

[CyberOrangeBadlands]

Pretty sure that’s a . . .

M6 X 1.0 X 15MM

Part #533.61 from Bestop

Uses a T-30 Torx bit

Just finished installing my Bestop Trektop and that’s what that one looks like for the control arm.

While we’re on the subject - would have been nice for Bestop to include some extra screws. Lost a screw and a washer somewhere behind B pillar and had to scramble for backups.

 

[Bentpushrod]

I’ve had two of those bolts back out and fall out. Luckily found them both. Applied loctite, reinstalled and no issues since.

 

[HighVelocity]

@Bestop_Team

 

[Lèòn]

Ty ty, now to order some

 

[Bestop_Team]

@Lèòn, @CyberOrangeBadlands is correct on the bolt size! I'm glad you got them ordered and so sorry for taking longer than normal to jump back in the forum. I'm glad @Bentpushrod @HighVelocity were able to help out, thanks guys!
~Crystal@Bestop

 

[cactusbase]

@Bestop_Team when I sold my hard top I didn’t retain the factory bolts (I included them in the sale) - do you know what bolt size that is or where to get them? I believe I need 8 of the original 10 for your trek top

 

[Ksjrb03]

@Bestop_Team when I sold my hard top I didn’t retain the factory bolts (I included them in the sale) - do you know what bolt size that is or where to get them? I believe I need 8 of the original 10 for your trek top

Trektop comes with all the bolts needed, even though the instructions state otherwise.

 

[cactusbase]

Trektop comes with all the bolts needed, even though the instructions state otherwise.

Thank you!! Just want to confirm - their install video at 2:50 here says the hard top bolts must be retained - are you positive?

 

[Ksjrb03]

Thank you!! Just want to confirm - their install video at 2:50 here says the hard top bolts must be retained - are you positive?

Yes

Sponsored