Sponsored

Stroppe exhaust video

SFCMarauder

Big Bend
Member
First Name
SFC
Joined
Sep 1, 2025
Threads
0
Messages
13
Reaction score
10
Location
Mass
Vehicle(s)
2025 Bronco
Your Bronco Model
Big Bend
"Sigh" What a waste of money. St. Jude would have been a better investment.
Sponsored

 

telenerd

Badlands
Well-Known Member
Joined
Jul 26, 2021
Threads
93
Messages
2,076
Reaction score
4,259
Location
Laramie
Vehicle(s)
Subaru
Your Bronco Model
Badlands
Clubs
 
Besides the exhaust, who in the right mind would mount gas tanks right behind the driver inside the cab!

Other than that got to see the Bilstein 8112s on a Stroppe.
 

BluebroncoNC

Stroppe
Well-Known Member
Joined
Apr 6, 2022
Threads
9
Messages
594
Reaction score
1,030
Location
North Carolina
Vehicle(s)
2025 Stroppe Bronco & 1977 Bronco
Your Bronco Model
Stroppe
Clubs
 
Besides the exhaust, who in the right mind would mount gas tanks right behind the driver inside the cab!

Other than that got to see the Bilstein 8112s on a Stroppe.
I wondered what that was... Think I might have just gone with spare cans, when needed, hanging off the back. But to each his own. I think about my '74 FJ-40. The passenger actually sits on the 11 gallon tank located in the cab directly under the passenger seat.

That fella has spent a lot on upgrading that truck. It is impressive. Good for him. However, from the poor video sound quality, perhaps the issue, all that work was not all that impressive sounding. I agree with folks who posted above, he could have come real close to it with just a simple muffler and pipe back modification. Will reserve final thoughts until I can hear it live, if that time ever comes.
 

AZ4x4Adventure

Big Bend
Well-Known Member
First Name
Jason
Joined
Dec 31, 2023
Threads
7
Messages
82
Reaction score
93
Location
Phoenix
Vehicle(s)
64 Impala, 22 Explorer, 23 Big Bend SAS 2.7
Your Bronco Model
Big Bend
Clubs
 
After looking at the raptor exhaust, what I would like to see someone attempt is downpipe back duals. SPD or CVF downpipes but instead of a Y, just an X and then duals all the way to the rear like a Bronco Raptor. At the rear could have 2 mufflers where the existing is located. 2 straight through for the passenger dual tips. Dual 2.5" to 2.75" pipes if dual 3" won't fit.

Could do dual mufflers in the mid section as well, just a lot tighter if you want to do a valved exhaust which you could do right at the back so you could have a loud side on the driver side and a quite side on the passenger side after going through the dual rear mufflers, or a single dual inlet muffler.
Sponsored

 
Last edited:
 





Top