- Joined
- Dec 30, 2024
- Threads
- 21
- Messages
- 633
- Reaction score
- 579
- Location
- North Carolina
- Vehicle(s)
- 2024 4 door 2.3 sasq
- Your Bronco Model
- Big Bend
- Thread starter
- #1
Does the steering rack (SD version) have a true mechanical zero input I can verify? Or is there an output from the rack that is more accurate than the steering degree display on the screen?
I replaced my UCAs a bit ago and it pulled a little. No biggie I'll get it aligned. Before I did, I welded the barnes LCA supports on. Got it aligned. Seemed fine, but took the tech a couple tries. Fast forward a week or two and it's pulling again. Before I mess with it more, I would really like to confirm the rack as true zero before changing the steering link or anything else.
I replaced my UCAs a bit ago and it pulled a little. No biggie I'll get it aligned. Before I did, I welded the barnes LCA supports on. Got it aligned. Seemed fine, but took the tech a couple tries. Fast forward a week or two and it's pulling again. Before I mess with it more, I would really like to confirm the rack as true zero before changing the steering link or anything else.
Sponsored
