Yes I will tonight. I managed to install the back set as well with a bracket I made. My bronco is at the dealer getting an oil change and swapping to SAS wheels/tires!
Sponsored
Sponsored
Here is the front. I used the holes for the liner clips #3 and 4. Behind the liner there are metal tabs behind each hole - attach the provided spring clips there. I used longer bolts than the ones provided - run those from the back side of the spring clip through the tab. Use provided washers and nuts.
Pic installed with SAS wheels
Last edited:
Outstanding! I'm certain people behind you will appreciate your rear flap install. Thx 4 the follow-up picsHere is the front. I used the holes for the liner clips #3 and 4. Behind the liner there are metal tabs behind each hole - attach the provided spring clips there. I used longer bolts than the ones provided - run those from the back side of the spring clip through the tab. Use provided washers and nuts.Back side. Used the only liner clip hole available. Unfortunately this does not connect to the body but rather attached to fender flare. Bottom bolt I bent a bracket attached to the furthest outside bolt on the bumper.
Pic installed with SAS wheels
- Joined
- Aug 13, 2021
- Threads
- 1
- Messages
- 361
- Reaction score
- 508
- Location
- Colorado Springs
- Vehicle(s)
- 2021 Ford Bronco, 2004 Volkswagen R32
- Your Bronco Model
- Badlands
Just added the Trophy Sport ones to mine this evening. They do interface with the factory rock rails but it's not too bad.
@Indica those came out great!
@Blaylock1988 i like the low profile look of those, but are the front ones effective at that size?
@Blaylock1988 i like the low profile look of those, but are the front ones effective at that size?
Sponsored
- Joined
- Aug 13, 2021
- Threads
- 1
- Messages
- 361
- Reaction score
- 508
- Location
- Colorado Springs
- Vehicle(s)
- 2021 Ford Bronco, 2004 Volkswagen R32
- Your Bronco Model
- Badlands
Better than nothing but I wish they were longer personally.
Looks great on rock rails. But anyone got stock boards? My build complete. Want to order. I emailed RekGen with no reply. Will these work without moving steps back? Ford site out of rails starting this week. So, not using Gator backs which I personally think look like the Yosemite Sam flaps. Like the flag.
How many inches below the bottom edge of the rock rail is the bottom of the mud flap?Just added the Trophy Sport ones to mine this evening. They do interface with the factory rock rails but it's not too bad.
It's 3 inches from the bottom of the stock rock rails to the bottom of the "trophy sport" rek gen mud flaps. I thought I heard they might be making longer ones but I did not see them.
Thanks. Longer ones are on their website, and I spoke to one of their techs. The XL ones are 4" longer than the Standard ones.It's 3 inches from the bottom of the stock rock rails to the bottom of the "trophy sport" rek gen mud flaps. I thought I heard they might be making longer ones but I did not see them.
Sponsored
Thanks. I'll have to see how my current ones do... Kinda hate to pay another 100 for a pair of front flaps after I just got these...I wish they would have told me about these when I was ordering while on the phone with them.
- First Name
- Steve
- Joined
- Jul 30, 2020
- Threads
- 3
- Messages
- 19
- Reaction score
- 14
- Location
- Dianavang16
- Vehicle(s)
- Subaru wrx
- Your Bronco Model
- Badlands
What size are the mud flap u got? Xl or regular flap.Just added the Trophy Sport ones to mine this evening. They do interface with the factory rock rails but it's not too bad.
- Joined
- Aug 13, 2021
- Threads
- 1
- Messages
- 361
- Reaction score
- 508
- Location
- Colorado Springs
- Vehicle(s)
- 2021 Ford Bronco, 2004 Volkswagen R32
- Your Bronco Model
- Badlands
There was only one option at the time, I guess it was standard length.
