Old school wheels options

[rhymeswithbronco]

Love this thread! I was looking for a set of kidney beans/slot mags but it doesn't look like it's going to happen without a ton of poke. So, this is what I'm eyeballing currently:

https://m.tirerack.com/wheels/Wheel...lished&initialPartNumber=1647983P&showRear=no

Sponsored

 

[odyssic1]

If anyone has interest in getting a steal on a vintage looking set up, I've got these. Not trying to make anything on them just trying to recoup some of my investment. My loss.

Here's the specs:

285/75r-16 (33")
Kumho Road Venture All Terrain AT51
(3 Peak Snow Rated) 5 tires w/mount balance OTD $1287.41
factory TPMS sensors are included, 5 x $27.50 $137.50
Stainless Steel beauty rings $65.00
Ford factory F150 caps $118.80 (won't work without heat forming)
Ford cap emblems $25.00
Painting stock wheels w/bed coating $30.00
Heat forming caps and painting wheels 4 hours shop labor $90x4 $360.00
Factory wheels $free

Or total Cost into this set $2,023.71
first $1500 cash gets them ......MUST PICK UP IN AZ

Thanks!

 

[peterh]

Love this thread! I was looking for a set of kidney beans/slot mags but it doesn't look like it's going to happen without a ton of poke. So, this is what I'm eyeballing currently:

https://m.tirerack.com/wheels/Wheel...lished&initialPartNumber=1647983P&showRear=no

That's going to be a good deal of poke too i think. I think you can get a similar look from another maker at 0 offset but cannot recall who - Mickey Thompson maybe?

 

[rhymeswithbronco]

That's going to be a good deal of poke too i think. I think you can get a similar look from another maker at 0 offset but cannot recall who - Mickey Thompson maybe?

I agree, a little on the pokey side, but hopefully not as extreme as this:

I think this may be the wheel you're referring to which is a contender, but won't have as much dish as the Ultra 164 either:

https://www.extremeterrain.com/g-fx...-wheel-17x9-0mm-offset-t16-790-6139-00-p.html

I'm hoping the Ultra 164 will be the sweet spot and I think this Bronco has them and looks great:



Regardless, I don't have my Bronco yet so this is all speculation until I put eyes and a measuring tape on it. Decisions, decisions.

 

[Johnny Bronco CO]

I’m headed to discount now to order these and bfgs . My question is can I order TPMS from discount that are compatible with the ford system? I’d like to throw these on the bronco (3weeks away) right when it comes in and not have to deal with unmounting the stock rubber to swap over sensors.

also does bronco come stock with a sensor in the spare?

Doesn't look like this model has been shared in this thread yet.

KMC Roswell | available in 17x8.5 ET+18 and ET0

[/QUOTE

I have these on my list. Not sure if you are wanting 17inch, but the 18inch has a +12 offset. Discount Tire stocks

I’m headed to discount now to order these and bfgs . My question is can I order TPMS from discount that are compatible with the ford system? I’d like to throw these on the bronco (3weeks away) right when it comes in and not have to deal with unmounting the stock rubber to swap over sensors.

also does bronco come stock with a sensor in the spare?

 

[ARETE]

I’m headed to discount now to order these and bfgs . My question is can I order TPMS from discount that are compatible with the ford system? I’d like to throw these on the bronco (3weeks away) right when it comes in and not have to deal with unmounting the stock rubber to swap over sensors.

also does bronco come stock with a sensor in the spare?

Those KMC Roswells look Good!! I'm So torn between putting WHITE Black Rhino "Solids" or WHITE 1552 Analogs on my EG BadSquatch that due in next week or going CHROME Pro-Comp old schools....these Roswells powder coated White is definitely an Option!!!

 

[RedHotFuzz]

Those KMC Roswells look Good!! I'm So torn between putting WHITE Black Rhino "Solids" or WHITE 1552 Analogs on my EG BadSquatch that due in next week or going CHROME Pro-Comp old schools....these Roswells powder coated White is definitely an Option!!!

Wonder if enough potential buyers could convince KMC to do a white version of the Roswell. It would stink to have to pay to powder coat a brand new set of wheels.

 

[Discount Tire]

@Johnny Bronco CO, Your local Discount Tire store should have the correct TPMS sensors to install with your tire wheel package. Please post a photo when you get them installed.

We appreciate your support.

 

[Johnny Bronco CO]

@Johnny Bronco CO, Your local Discount Tire store should have the correct TPMS sensors to install with your tire wheel package. Please post a photo when you get them installed.

We appreciate your support.

Sure will. We are about 3 weeks away, but the setup will be mounted and ready to go day one. I’m glad I went in yesterday as there is a back order situation with bfg ko2 35x12.5 17s. Should be in stock 2nd week of March.

 

[GToddC5]

Little while back I did this photochop of The FJ Company 16x6 wheels w/ Toyo 255/85R16 that I have installed on my FJ40. They should fit, so I might give this a go on a nice day. It's not to correct scale, because I sized them up to cover the 35s from this pic, but you guys get the idea:

 

[MachOneGarage]

This thread has been a huge help for me during my wheel search, thought I'd share the final product:

 

[AARDVARK122]

This thread has been a huge help for me during my wheel search, thought I'd share the final product:

Looks good what wheel company did you end up going with? What size and offset?

 

[AARDVARK122]

This thread has been a huge help for me during my wheel search, thought I'd share the final product:

Looks like you color matched the front grill. Do you have a picture of that?

 

[NatureMan]

This thread has been a huge help for me during my wheel search, thought I'd share the final product:

What is the weight of the wheels, they look heavy?

 

[MachOneGarage]

Looks like you color matched the front grill. Do you have a picture of that?

Yessir, got quite a few pics in this thread:

https://www.bronco6g.com/forum/thre...ur-door-retro-sport-build.40390/#post-1310572

Sponsored