Sponsored

New BuckStop Front bumper

Who iz

Badlands
Well-Known Member
First Name
Otis
Joined
Apr 5, 2021
Threads
19
Messages
546
Reaction score
739
Location
End of the Oregon trail
Vehicle(s)
F250, 4Runner, Jimmy
Your Bronco Model
Badlands
Finally, now have the front Bumper I have wished and wanted all along installed on my Bronco.

https://www.buckstopinc.com/classic-2-4988.html

The winch will have to wait for a little while, as I need to with fore thought 'pull the trigger' and decide on which one will ultimately be installed.
Leaning toward purchasing a Warn 12000, with steel cable. Don't care for synthetic in my local climate, too much exposure to sun, dirt, rain, mud and grime.

Ordered:
July 31, 2022.
Vendor manufactured and painted with "Mini-tex black (fine flat texture)", included vendor remounting the OEM front sensors and also the front camera all reinstalled by vendor in Prineville, Oregon USA.
Initial impression:
Awesome. No 'Regrats'.

Additional info:

As is (pre-winch): drops the front end exactly 1/2 inch on a 2022 more door squatched Badlands. I did not weigh the bumper before they installed it- but I measured carefully in the same parking spot before (and after) the OEM modular came off and the new Bumper went on. Will eventually ask advice and input on best way to level the front again to factory specs after the winch is in place.

included PIAA fog lights to look a little retro on the pavement. My other lights are fine on the trails.

Why I am loyal to BuckStop:
My '03 F250 has had one of the Buckstop bumpers on it for years- and it proved itself with a 55-60mph direct hit on a full grown buck. No warning and could not even slow down- he was at full speed....Zero damage to truck, only cracked a weld on the bumper, instant death to the buck muledeer- which sailed at least 40' across the highway and landed near the berm 'safely' outside the oncoming lane's right of way. Gratefully, no oncoming traffic at that point in time. Local shop easily repaired the broken weld and blended the paint. Likely would have totaled the truck without the BuckStop.

Apologies, My Bronco is usually not too clean>>> bumper will soon match the dirty hood deflector, at least I am Enjoyin' the ride?
Ford Bronco New BuckStop Front bumper Buckstop Bumper.11.18.2022.a
Ford Bronco New BuckStop Front bumper Buckstop Bumper 11.18.2022.b
Ford Bronco New BuckStop Front bumper Buckstop Bumper 11.18.2022.c
Ford Bronco New BuckStop Front bumper Buckstop Bumper 11.18.2022.d
Ford Bronco New BuckStop Front bumper Buckstop Bumper 11.18.2022.side
Ford Bronco New BuckStop Front bumper Buckstop Truckware.TrailReady Reunel

Ford Bronco New BuckStop Front bumper Buckstop Bumper.11.18.2022.a
Sponsored

 

2020FordRaptor

Wildtrak
Well-Known Member
First Name
Ty
Joined
Aug 14, 2022
Threads
18
Messages
1,694
Reaction score
1,118
Location
Nevada
Vehicle(s)
2020 Ford Raptor
Your Bronco Model
Wildtrak
Finally, now have the front Bumper I have wished and wanted all along installed on my Bronco.

https://www.buckstopinc.com/classic-2-4988.html

The winch will have to wait for a little while, as I need to with fore thought 'pull the trigger' and decide on which one will ultimately be installed.
Leaning toward purchasing a Warn 12000, with steel cable. Don't care for synthetic in my local climate, too much exposure to sun, dirt, rain, mud and grime.

Ordered:
July 31, 2022.
Vendor manufactured and painted with "Mini-tex black (fine flat texture)", included vendor remounting the OEM front sensors and also the front camera all reinstalled by vendor in Prineville, Oregon USA.
Initial impression:
Awesome. No 'Regrats'.

Additional info:

As is (pre-winch): drops the front end exactly 1/2 inch on a 2022 more door squatched Badlands. I did not weigh the bumper before they installed it- but I measured carefully in the same parking spot before (and after) the OEM modular came off and the new Bumper went on. Will eventually ask advice and input on best way to level the front again to factory specs after the winch is in place.

included PIAA fog lights to look a little retro on the pavement. My other lights are fine on the trails.

Why I am loyal to BuckStop:
My '03 F250 has had one of the Buckstop bumpers on it for years- and it proved itself with a 55-60mph direct hit on a full grown buck. No warning and could not even slow down- he was at full speed....Zero damage to truck, only cracked a weld on the bumper, instant death to the buck muledeer- which sailed at least 40' across the highway and landed near the berm 'safely' outside the oncoming lane's right of way. Gratefully, no oncoming traffic at that point in time. Local shop easily repaired the broken weld and blended the paint. Likely would have totaled the truck without the BuckStop.

Apologies, My Bronco is usually not too clean>>> bumper will soon match the dirty hood deflector, at least I am Enjoyin' the ride?
Buckstop Bumper.11.18.2022.a.jpg
Buckstop Bumper 11.18.2022.b.jpg
Buckstop Bumper 11.18.2022.c.jpg
Buckstop Bumper 11.18.2022.d.jpg
Buckstop Bumper 11.18.2022.side.jpg
Buckstop Truckware.TrailReady Reunel.png

Buckstop Bumper.11.18.2022.a.jpg
That looks amazing! Probably one of my favorite bumpers out there.
 

chtucker

First Edition
Well-Known Member
Joined
Nov 24, 2019
Threads
184
Messages
2,152
Reaction score
4,069
Location
Kirkland, WA
Vehicle(s)
FJ Cruiser
Your Bronco Model
First Edition
There is only one winch option with that bumper, because it's the only bumper that can accommodate an 8274... you need to do it.

I was Impatient and begged for an early version from them. I have one of their first sets of TR wheels for the Bronco.

Great group of companies and great people. Nice bumper!
 

Sponsored
OP
OP
Who iz

Who iz

Badlands
Well-Known Member
First Name
Otis
Joined
Apr 5, 2021
Threads
19
Messages
546
Reaction score
739
Location
End of the Oregon trail
Vehicle(s)
F250, 4Runner, Jimmy
Your Bronco Model
Badlands
There is only one winch option with that bumper, because it's the only bumper that can accommodate an 8274... you need to do it.

I was Impatient and begged for an early version from them. I have one of their first sets of TR wheels for the Bronco.

Great group of companies and great people. Nice bumper!
I need a few moments of financial recovery.
 

chtucker

First Edition
Well-Known Member
Joined
Nov 24, 2019
Threads
184
Messages
2,152
Reaction score
4,069
Location
Kirkland, WA
Vehicle(s)
FJ Cruiser
Your Bronco Model
First Edition
I need a few moments of financial recovery.
I think the 8274 has increased in price by over $1k in the last couple of years. I purchased mine in 2019 a 8274-70 with synthetic for $2200? I thing that same winch is almost $3400 now
 
OP
OP
Who iz

Who iz

Badlands
Well-Known Member
First Name
Otis
Joined
Apr 5, 2021
Threads
19
Messages
546
Reaction score
739
Location
End of the Oregon trail
Vehicle(s)
F250, 4Runner, Jimmy
Your Bronco Model
Badlands
A year has past and my budget recovered sufficiently to install the new winch
and here is a few up-dated images showing the new plate made to cover and protect the winch (from the mud and weather) mounted in the 1 year old Buckstop front bumper.


(New front shocks are next planned improvement/upgrading to the Bilstein B8 6112)


Ford Bronco New BuckStop Front bumper 1702236971002


Ford Bronco New BuckStop Front bumper 1702238076483


Ford Bronco New BuckStop Front bumper 1702237743863


Ford Bronco New BuckStop Front bumper 1702238261212
Sponsored

 
Last edited:
 





Top