Need 1/2 inch up front

[nipeej]

I replaced my front bumper and added a winch, lost only 3/8 inch ride height up front. My thought is using a 1/2 inch spacer on the bottom of the strut at the lower control arm. Looking for suggestions or opinions.
Thanks

Sponsored

 

[MillerAndCheeto]

I did the same thing, lost 0.25 - 0.3" with the winch. I am thinking of going with RPG Perch collars and just doing the 2.25/1.25 lift.

 

[rtaylor]

I replaced my front bumper and added a winch, lost only 3/8 inch ride height up front. My thought is using a 1/2 inch spacer on the bottom of the strut at the lower control arm. Looking for suggestions or opinions.
Thanks

If you buy the RC 1" kit, it has 3 spacers (one lower, 2 upper). To get ~3/8" lift, add only the lower 0.25" spacer. To get ~0.5", use both upper 3/16" spacers. Note that lift to spacer ratio is about 1.5.

 

[HighVelocity]

Sumo Springs.

https://www.bronco6g.com/forum/threads/sumosprings-front-coil-spacers.73251/

Sponsored