Modular Bumper Issue

[OVRLNDR]

Removed the Capable Bumper, installed a Modular Bumper, and have been getting the Parking Fault error ever since. I purchased and switched the left and right sensors on the ends of the bumper with the right-angle sensors to fit the Modular Bumper correctly.

I purchased and installed a new wiring harness, which didn't resolve the problem, so I went back to the old harness. I sprayed some WD40 into the male and female connections in case dirt got in there, and nothing.

Unless a programming update or something is required for the new sensors, I'm all out of ideas regarding what the issue might be, or how to trouble-shoot it.

Sponsored

 

[Ford Motor Company]

Removed the Capable Bumper, installed a Modular Bumper, and have been getting the Parking Fault error ever since. I purchased and switched the left and right sensors on the ends of the bumper with the right-angle sensors to fit the Modular Bumper correctly.

I purchased and installed a new wiring harness, which didn't resolve the problem, so I went back to the old harness. I sprayed some WD40 into the male and female connections in case dirt got in there, and nothing.

Unless a programming update or something is required for the new sensors, I'm all out of ideas regarding what the issue might be, or how to trouble-shoot it.

Hi there, Joe. This Modular Bumper concern doesn’t sound like something we want you to experience with your Bronco. Could you please send us a PM with your VIN and the name and location of your Ford dealer? To send a private message, just click on our username and select "Start Conversation". I'd be happy to look into how I can assist you on my end.

 

[Warner76]

Did you happen to ever get this resolved? I’m running into the same issue. I had a capable bumper with sensors and did a direct swap (sensors and harness included) of a modular bumper. I updated the bumper in FDRS but no matter I what I do it will not acknowledge the sensors from the modular bumper.

Sponsored