JcrOffroad - prototyping begins!

[JcrOffroad]

Will they hold a big gulp?

Are we taking 32oz, 44oz or that giant refillable jug?!

Sponsored

 

[chtucker]

Feedback on the camera relocate kit-

1) I have a ridiculously long camera extension cable.. comically long. It would be nice if it had the correct connectors on it so I didn't need to reuse the factory grill cable. Just one extension instead . I also need to unwrap all the tape to get the plastic clips off the harness

2) install video didn't seem to mention the cover over the rear of the camera/protection plate. Nice to have, but I was scratching my head for a moment.

3) The holes on the rear cover plate were slightly off.

4) Warn fairlead needed to be flipped upside down because it's got a hump on top. Messes with my OCD, going to replace it with something different because of that.

I know it's not a JCR winch plate, but it is your camera relocate kit

 

[Bird Dog Off Road]

Same experience here.

 

[JcrOffroad]

We are having sourcing issues for the proper length camera extension cable. Imagine that. Ha! So we grab what we could get.

 

[ICUGAZN]

Are we taking 32oz, 44oz or that giant refillable jug?!

I prefer the 44oz. . I remember when the big gulps came out back in 1980. It was 32oz.

 

[chtucker]

We are having sourcing issues for the proper length camera extension cable. Imagine that. Ha! So we grab what we could get.

eBay, has them.... with the correct ends https://www.ebay.com/itm/153507887638

 

[Bird Dog Off Road]

eBay, has them.... with the correct ends https://www.ebay.com/itm/153507887638

Here is one with the correct connections on both ends.
https://www.ebay.com/itm/Car-Antenna-Extension-Cable-Fakra-F-Brown-Female-to-Female-Pigtail-RG174-2m-6-FT-/153510838512?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

 

[killaz05]

Finished install of the 4-door gas tank skid!

These skid plates cover the transmission crossmembers? Reason I ask is because these are taking a beating already on my Badlands. Look forward to when they are released!

 

[JcrOffroad]

These skid plates cover the transmission crossmembers? Reason I ask is because these are taking a beating already on my Badlands. Look forward to when they are released!

Yes.

 

[JcrOffroad]

Here are the lower control arm skids. 3/16” steel. Bolt on installation. Don’t be fooled by anyone make them out of 1/8”, that’s too damn flimsy for this application.

https://www.jcroffroad.com/product/BR6SD-LCA.html

 

[Bird Dog Off Road]

Here are the lower control arm skids. 3/16” steel. Bolt on installation. Don’t be fooled by anyone make them out of 1/8”, that’s too damn flimsy for this application.

https://www.jcroffroad.com/product/BR6SD-LCA.html

Nice!

 

[killaz05]

Those A-Arm skids look great, in fact the whole system looks great. Will there be a whole skid plate package available, or do we purchase the system individually?

 

[jonesh242]

SO GOOD! Please have a full package deal...pretty please.

 

[MWILD]

Will these skids work with the modular front bumper and bash plate?

Front skid, transmission skid, tcase skid and lower control arm skids!

 

[JcrOffroad]

Those A-Arm skids look great, in fact the whole system looks great. Will there be a whole skid plate package available, or do we purchase the system individually?

It’s all sold individually. Should be up this week.

Sponsored