- First Name
- HOSS
- Joined
- Jul 22, 2022
- Threads
- 13
- Messages
- 384
- Reaction score
- 674
- Location
- Boerne, TX.
- Vehicle(s)
- 2023 Badlands, 2022 BMW X3 M-SPORT
- Your Bronco Model
- Badlands
- Thread starter
- #1
After debating different shocks for my build I went with the Bilstein 6100's (they also were on sale at Stage 3 Motorsports which helped). I am running a BDS puck style lift on my 2023 Badlands SAS. My tech installed the 6100's at the lowest "1" setting as that is what it appeared to say to do in the directions, put it on the ground and now I have a rake to the front and it is noticeably lower in the front, back might be a tad but the front is very noticeable. Measuring the rear from the ground vs. the front the front is almost 1.25" lower in the front where usually they were pretty level.
Attached is the new pic (pointed right) and an old pic I found (pointed left) The Before pic is without the 1/2" body lift, the new pic even has the 1/2" body lift on it.
I am going to have my tech redo the front and move the clip I think but has anyone experienced this on the 6100 with it sitting lower on the stock setting?
TIA,
Dave
Attached is the new pic (pointed right) and an old pic I found (pointed left) The Before pic is without the 1/2" body lift, the new pic even has the 1/2" body lift on it.
I am going to have my tech redo the front and move the clip I think but has anyone experienced this on the 6100 with it sitting lower on the stock setting?
TIA,
Dave
Sponsored