- First Name
- Greg
- Joined
- Apr 14, 2023
- Threads
- 8
- Messages
- 54
- Reaction score
- 47
- Location
- New Jersey
- Vehicle(s)
- Dodge Challenger Scat Pack WB Shaker ; Tesla M3P
- Your Bronco Model
- Wildtrak
- Thread starter
- #1
Just finished the install.
A few observations:
The wiring harness is just long enough. The splitter that the right fogs attach to struggles to fit through some of the narrow gaps in the 2.7L bay.
The lights look really nice in person. Fit really well in the HD Modular bumper. You definitely need to remove the plastic inserts around the tow loops.
They will run on the 10 Amp Aux circuits. I wired mine to Aux 5 and 6
The ground wire struggled to reach the recommended place the instructions had pictured. I grounded the lights close to the recommended area, but not the exact place. They are grounded with an additional circuit below it. Shouldn't be an issue though as these do not draw a ton of power.
Feel free to ask any other questions. I'd be happy to be available to assist with an install if that would help.
Sponsored
Last edited: